Contribute
Register

Asus UX21E - Intel HD 3000 problem

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,075
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
Same problem :/.
Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):
Code:
kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda
Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /
Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
Joined
Apr 24, 2016
Messages
20
Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):
Code:
kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda
Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /
Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
okey, all files in pack.zip.
But
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /
do nothing in Terminal.
 

Attachments

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,075
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
okey, all files in pack.zip.
This ioreg was captured when booting with an invalid FakeID (even though one is not specified in config.plist).
No expectation of properly working graphics with an invalid FakeID.

But
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /
do nothing in Terminal.
All kexts should be installed to the system volume. You can read about it in the Clover laptop guide (post #2).
 
Joined
Apr 24, 2016
Messages
20
This ioreg was captured when booting with an invalid FakeID (even though one is not specified in config.plist).
No expectation of properly working graphics with an invalid FakeID.



All kexts should be installed to the system volume. You can read about it in the Clover laptop guide (post #2).
Without FakeID system doesn't start in every config.plist.
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,075
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
Without FakeID system doesn't start in every config.plist.
Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

Also, use an external (HDMI or DP) monitor to debug. The external monitor may work in scenarios that the internal does not.
 
Joined
Apr 24, 2016
Messages
20
Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

Also, use an external (HDMI or DP) monitor to debug. The external monitor may work in scenarios that the internal does not.
Okey, all files in pack.zip.
Kexts in S/L/E: FakeSMC, VoodooPS2Controller.
I don't have access to adapter hdmi to microhdmi at this moment. I'm waiting for the shipment (this adapter).
 

Attachments

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,075
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
Okey, all files in pack.zip.
Kexts in S/L/E: FakeSMC, VoodooPS2Controller.
I don't have access to adapter hdmi to microhdmi at this moment. I'm waiting for the shipment (this adapter).
Perhaps you need to inject EDID. Read Clover documentation on InjectEDID and CustomEDID.
 
Joined
Apr 24, 2016
Messages
20
Perhaps you need to inject EDID. Read Clover documentation on InjectEDID and CustomEDID.
Okey, i use injectEDID but screen stay black, when I dump EDID with EDID Viewer paste to clover configurator (customEDID) but same effect (black screen) :/.
Code:
EDID
Table:
00 FF FF FF FF FF FF 00 0D F2 89 04 00 00 00 00 
20 15 01 04 95 1A 0E 78 02 88 D5 94 59 55 92 27 
20 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 
01 01 01 01 01 01 04 1E 56 C2 50 00 35 30 30 20 
3C 00 00 90 10 00 00 19 04 1E 56 C2 50 00 35 30 
30 20 3C 00 00 90 10 00 00 18 00 00 00 FE 00 49 
56 4F 0A 20 20 20 20 20 20 20 20 20 00 00 00 FC 
00 50 31 31 36 4E 57 52 31 20 52 32 0A 20 00 86

64 [Hex]
00FFFFFFFFFFFF000DF289040000000000020150104951A0E780288D5945955922070020505400000001010101010101010101000010101010101041E56C25000353030200003C00009010000019041E56C25000353000030203C00009010000018000000FE0040900564F0A202020202020202020000000FC00000503131364E5752312052320A20008


In Config.plist:

<key>CustomEDID</key>
        <data>
        AP///////wAN8okEAAAAAAACAVAQSVGg54AojVlFlVkiBwAgUFQAAAABAQEB
        AQEBAQEBAAAQEBAQEBBB5WwlAANTAwIAADwAAJAQAAAZBB5WwlAANTAAAwID
        wAAJAQAAAYAAAA/gBAkAVk8KICAgICAgICAgAAAA/AAABQMTE2TldSMSBSMg
        ogAI
        </data>
Dump from EDID Viewer in *.txt file
 

Attachments

Last edited:

RehabMan

Moderator
Joined
May 3, 2012
Messages
191,075
Motherboard
Intel DH67BL
CPU
Core i7-2600K
Graphics
Intel HD 3000
Mac
MacBook Air
Mobile Phone
iOS
Okey, i use injectEDID but screen stay black, when I dump EDID with EDID Viewer paste to clover configurator (customEDID) but same effect (black screen) :/.
Try external monitor.
 
Top