Contribute
Register

Asus UX21E - Intel HD 3000 problem

Status
Not open for further replies.
Same problem :/.

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):
Code:
kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):
Code:
kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
okey, all files in pack.zip.
But
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /
do nothing in Terminal.
 

Attachments

  • pack.zip
    2.4 MB · Views: 129
okey, all files in pack.zip.

This ioreg was captured when booting with an invalid FakeID (even though one is not specified in config.plist).
No expectation of properly working graphics with an invalid FakeID.

But
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /
do nothing in Terminal.

All kexts should be installed to the system volume. You can read about it in the Clover laptop guide (post #2).
 
This ioreg was captured when booting with an invalid FakeID (even though one is not specified in config.plist).
No expectation of properly working graphics with an invalid FakeID.



All kexts should be installed to the system volume. You can read about it in the Clover laptop guide (post #2).
Without FakeID system doesn't start in every config.plist.
 
Without FakeID system doesn't start in every config.plist.

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

Also, use an external (HDMI or DP) monitor to debug. The external monitor may work in scenarios that the internal does not.
 
Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

Also, use an external (HDMI or DP) monitor to debug. The external monitor may work in scenarios that the internal does not.
Okey, all files in pack.zip.
Kexts in S/L/E: FakeSMC, VoodooPS2Controller.
I don't have access to adapter hdmi to microhdmi at this moment. I'm waiting for the shipment (this adapter).
 

Attachments

  • pack.zip
    4.2 MB · Views: 134
Okey, all files in pack.zip.
Kexts in S/L/E: FakeSMC, VoodooPS2Controller.
I don't have access to adapter hdmi to microhdmi at this moment. I'm waiting for the shipment (this adapter).

Perhaps you need to inject EDID. Read Clover documentation on InjectEDID and CustomEDID.
 
Perhaps you need to inject EDID. Read Clover documentation on InjectEDID and CustomEDID.
Okey, i use injectEDID but screen stay black, when I dump EDID with EDID Viewer paste to clover configurator (customEDID) but same effect (black screen) :/.
Code:
EDID
Table:
00 FF FF FF FF FF FF 00 0D F2 89 04 00 00 00 00 
20 15 01 04 95 1A 0E 78 02 88 D5 94 59 55 92 27 
20 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 
01 01 01 01 01 01 04 1E 56 C2 50 00 35 30 30 20 
3C 00 00 90 10 00 00 19 04 1E 56 C2 50 00 35 30 
30 20 3C 00 00 90 10 00 00 18 00 00 00 FE 00 49 
56 4F 0A 20 20 20 20 20 20 20 20 20 00 00 00 FC 
00 50 31 31 36 4E 57 52 31 20 52 32 0A 20 00 86

64 [Hex]
00FFFFFFFFFFFF000DF289040000000000020150104951A0E780288D5945955922070020505400000001010101010101010101000010101010101041E56C25000353030200003C00009010000019041E56C25000353000030203C00009010000018000000FE0040900564F0A202020202020202020000000FC00000503131364E5752312052320A20008


In Config.plist:

<key>CustomEDID</key>
        <data>
        AP///////wAN8okEAAAAAAACAVAQSVGg54AojVlFlVkiBwAgUFQAAAABAQEB
        AQEBAQEBAAAQEBAQEBBB5WwlAANTAwIAADwAAJAQAAAZBB5WwlAANTAAAwID
        wAAJAQAAAYAAAA/gBAkAVk8KICAgICAgICAgAAAA/AAABQMTE2TldSMSBSMg
        ogAI
        </data>

Dump from EDID Viewer in *.txt file
 

Attachments

  • EDID_Viewer_Dump.txt
    2.8 KB · Views: 130
Last edited:
Okey, i use injectEDID but screen stay black, when I dump EDID with EDID Viewer paste to clover configurator (customEDID) but same effect (black screen) :/.

Try external monitor.
 

Attachments

  • IMG_1312.JPG
    IMG_1312.JPG
    3.7 MB · Views: 203
  • IMG_1313.JPG
    IMG_1313.JPG
    4.2 MB · Views: 160
Status
Not open for further replies.
Back
Top