Hi All,
Recently I changed from my trusty Clover build over to Opencore to try and get upgrading smoother and fix my USB3. The process (after a lot of reading) went smoothly give or take a few issues.
Firstly I have an issue regarding my BIOS getting corrupted on unclean shutdowns but I’ve got...
Hi All,
So my first venture over to Opencore has gone well however but it has thrown up a concern. If for any reason I get an unclean shutdown i.e. I'm at the picker list I think...crap I forgot to plug in that USB drive and push the reset button (no shutdown or restart option at the pick...
I've written some detailed guide in my time but I'm going to keep this one shorter. I want to accomplish 2 things with this write up.
1. Address the native nvram problem, this is huge for people with similar hardware moving forward with Big Sur.
2. Help others get installed and booted with a...
Hello @Feartech I installed Big Sur release in my system (z97-hd3) using a USB pen drive and it went smoothly. The only issue so far is that the USB 3.1 ASmedia 2142 controller pcie card is not loaded and the USB 3.1 external disk is not recognized as such when connected. Attached are some...
i want to hackintosh high sierra.I have a computer like this
CPU i5 4690K
motherboard Asus z97-a
GPU GTX 960 4G
SSD toshiba 128 nvme
memory 8GB
is there anyone success?could you share your EFI
Hi,
having trouble to get wake from sleep to work :-/ After choosing "System->Sleep" I wake it using the power button but the screen remains black (I am using the integrated HD 4600 graphics - i7-4771). The IO activity LED shows some activity but then remains on and the system is stuck - the...
Hello guys, i just noticed that my USB3 ports are all mixed up in Catalina 10.15.4 and I'm struggle to fix this annoying problem, the USB Port-Limit Removal Patch from this thread doesn't seem to have any impact (with or without it's the same) My USB 3 devices are working fine though (2...
Hello to all
Sorry my english, I'm italian.
PC configuration:
cpu:i5 4690k
ram:32gb
Motherboard:GA-Z97X-UD3H
gpu: ATI 590 nitro +
I had previously installed Mojave without any problems.
I formatted and installed catalina
Catalina is vanilla.
installation without problems.
I boot with clover, I...
Hackintosh was built by the Stork's instructions for Hector. Added RX 580 and Lilu+WEG to L/E with Hackintool and updated it to 10.15.2 from 10.13.6.
I have a problem with USB (3.0). I tried to make my own SSDT like on this video (Instructions by @RehabMan). As the video says I also added...
I have followed the basic guide to get Mojave installed on my Z97 Deluxe.
Now I need help with Bluetooth and audio.
Bluetooth:
Product ID: 0x17cf
Vendor ID: 0x0b05 (ASUSTek Computer Inc.)
Version: 1.12
Speed: Up to 12 Mb/sec
Manufacturer: Broadcom Corp
Location ID: 0x14200000...
Components:
MSI Z97 Sli Krait
Intel 4690k
Gigabyte G1 GTX 970
Sandisk SSDnow 120gb SSD (Main), Toshiba Q300 500gb SSD
Hyper X Fury Ram
Disabled appropriate settings for motherboard
I followed instructions on TonyMac x86 to create a Mojave bootable USB
Successfully reached Clover screen and can...
I installed high sierra 10.13.5 on my hackintosh.
My device:
brand: ASUS
Motheboard : Z97
CPU: core i7 4770
RAM : 16G
Graphics: Hd4600
connector: (originally VGA) HDMI to HDMI cable + HDMI to DVI converter.
configuration:
- I copied following files to "kexts/others/".
AppleALC.kext...
Z97 Gaming 6 High Sierra Install
System Specs
MSI Z97 Gaming 6
Intel i7-4790K
Corsair Vengeance 16GB 2400Mhz
Kingston A400 240GB SSD
GTX980Ti x2 SLI
Corsair CX850M PSU
TPLink WDN4800 Wireless Adapter
1. Create bootable device with a MAC and Unibeast by this method...
Hello there
I'll start with listing my specs:
Asus Maximus VII Ranger(SurpremeFX 2014 Audio) I think this translates to ALC1150 (I could be wrong) - 6 Jacks in the back and 2 jacks in the front.
I7 4790k
2x8 1866Mhz ram.
GTX 1080
1TB HDD (Currently the only drive attached, because I am using...
Hi, my system (https://www.tonymacx86.com/threads/success-msi-z97-matx-i7-4790k-16gb-ram-intel-hd-graphics-4600.224452/) was update to High Sierra (10.13.3) but I am suffering some issues, the audio doesn't work and the most critical: it resets instead of shutdown.
I tried to set FixShutdown...
Hi hackintoshers!
I did a build with El Capitan over a year ago on my listed hardware and it's been running great!! But last week I decided to do a Sierra build from scratch (Build: https://www.tonymacx86.com/threads/guide-ga-z97x-gaming-3-i7-4790k-gtx960-sc-e2200-ac1150.242977/#post-1669592)...
I have a Z-97 running Yosemite (10.10.5). It has a GTX680, which was originally installed using Nvidia drivers.
Specifically, it's an ASUS Z97 Pro (WiFi AC). Other than the stock motherboard and a few drives, the only mod to the system is the addition of the GTX680 card, which has been working...
Hi,
I am building Asus Z97 Gryphon, i7-4790K with Sapphire RX 580 Nitro+ 8G.
Do I need to helper video card? or can I use RX 580 for installation? For installation, should I use intel iris video first?
Once I installed it, it just stopped during moving status bar. and graphic card fan also...
Hi, I upgraded from El Capitan to Sierra 10.12.6. I lost audio in the process and I've been reading and reading and I seem to NOT be able to get it to work.
In Preferences I get No Output device found. I think I may have changed the 'profile' in Multibeast or Clover. My Hackintosh was...
Hi All,
I am currently running on OS X 10.13.1 (High Sierra) and everything works perfectly, besides sleep... I've scoured the internet for an answer but can't figure out how to force my computer to stay asleep (seriously, it's like an infant that's consumed too much sugar). Keeping the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.