usb 3 isuue

The issue and question has been fixed, and this post is no longer relevan.

Hello all So for a while now, I've been trying to investigate on my end on how to get all of the USB ports (mostly USB 3.0) active ever since after the 11.3 update that happened a while back. As of right now, I have a USB 2.0 Hub on the back on the motherboard and I'm using my keyboard, mouse...

I have an ASUS Z370 Prime-A running the latest clover and Catalina latest updates. Most everything is working and I am pretty happy with the setup but I have noticed that if I try to insert a USB 3.0 device into any of the USB ports (at least the non Asmedia Ports which are disabled) the device...

I have successfully installed Catalina 10.15.4 on an ASUS Prime Z370-A with Core i7 8700K and integrated graphics. Most everything works except the USB 3.1 Gen 2 C Port on the back plane of the motherboard. I have tried mapping the ports using all the advice from the various posts/tutorials but...

So after a bad bios update I had to replace my motherboard and decided to get a cheaper newer model. One of the first issues I noticed most of the usb3 ports are running at usb2 speed. Even my Alpine Ridge Thunderbold 3 card is operating at usb2 speed. Any help would be grateful.

Hello everyone, I've had a January 2013 "CustoMac Mini" build (H77n-WiFi [F2 firmware], Core i3, 8GB ram, Samsung 840 SSD, Chameleon legacy boot). It's been stable for about 5.5 years. Thinking that the SSD might've been flaking out, I did a brand new install on a Samsung 860 SSD. I used a DSTD...

Since Mac OS Sierra I'm trying to make USB 3.0 works in my Hack. I've tried by installing USBInjectAll and other solutions that come with Multibeast but never works for me, because I don't understand it yet. The search for an ID and replace to another. I tried to read a lot of tutorial about...

Dear friends, I want to install macOS Mojave on my HP Omen 880 (Motherboard => HP 8437) I have created a bootable usb using Unibeast but the problem is that I cannot get the usb device recognised in the UEFI booting options though I have tried all the BIOS settings and already set the USB boot...

I installed High Sierra in my old computer, I5 4460, ASUS B85M Plus, GTX750Ti, Everything seems OK, but the front USB not work, I cannot find any solution here, I tried to install all usb kext by the unibeast, but still not work.

Hi everyone! I´m new here and made all my hackintosh following a ton of guides here! Almost everything works fine! Main problems: 1.When I try to shutdown the PC won´t shut down and I need to press the power button to shut down. Then, when I turn on show the message "Your computer was...

I have a Gigabyte Z370n WIFI , (i7-8700k, 32GB DDR4 2666Mhz, 2 x M2.ssd) up and running with High Sierra 10.13.6. So far so good since most things work fine. The problem is USB. - I can only get USB 3.0 to work on 2 USB ports - USB 3.0 devices (thumb drive, external usb driv etc. ) do not work...

Hi, I’m trying to install Mac OS High Sierra in my Desktop. Earlier I had installed El Capitan in this, which was working smooth. MoBo : Gigabyte GA-H170 Gaming 3 (H170 Chipset, 100 Series, LGA 1151, Realtek ALC1150) Processor : Intel i3 6100 GPU : Sapphire RX 480 8 GB SSD : Samsung 840 EVO 128...

I'm trying to fix the USB3 ports on my current build (Z270A). Up till now I only get USB2 on the USB3 ports. Following the Skylake Starter Guide (which I assume also works for Kaby Lake), it says I should get 26 entries for XHC in IO Registry Explorer, but I only get 15 (see attached file). I...

Hello. Before I begin, let me list my hardware on the off chance that my build signature isn't working or something of that nature: Intel Core i7-6700k @ 4.00 GHz MSI GeForce GTX 1080 GAMING X 8G ASRock z170 Pro4S ATX Corsair VENGEANCE LX 16Gb (2x 8GB) DDR4 @ 3200 Corsair CX600 600W 80 Plus...

I just realized today that USB 3.0 totally stopped working for me somewhere in my series of High Sierra upgrades. I know USB 3.0 used to work when I was on Sierra. Basically, any USB 3.0 device will not show up at all. I am attaching a screenshot of my L/E folder Finder_LE by exleung posted...

I upgraded to High Sierra 10.13.2 my z97-hd3 build and I’m having trouble with my USB 3.0 and the Broadcom 94331CD WiFi icon is showing a message saying that no hardware is installed. Could anyone advise what should I do to make these two things working again? Attached is the clover folder and...

Hello, I am 76 and just built my first Hackintosh. I have been a Mac user since 1984 but I am a Hackintosh noob. I installed 10.12.6 using clover and now have a stable configuration so far, but I cannot get usb 3 ports to operate at 5Gb/sec. Only one of the case ports will run at usb 3 5Gb/sec...

Hey Everyone, I just wanted to prepare for the High Sierra Upgrade, so I updated Clover via the Clover Configurator App. I didn't change anything else. But on the Next Boot of my Hackintosh the Boot Freezes. I was able to Boot the Hackintosh with a freshly created Unibeast clover stick. But...

Hi Gang, I've been away from here forever, just returned cause I got the itch. Installed and have Clover up and running. System looks good, but I don't know how (and after spending 10 hours looking), I need some help getting the built in USB 3 working on my good old GA-Z68A motherboard. I also...

Hi this is my first post here. Great work and big thanks to tony an all the others for this hard work. After installing 10.12.6 on my Asus Rampage IV Gene and i7 4930k nearly everything works fine. But USB 3 ist not working. After patching with MultiBeast, all USB 2.0 ports are working, but no...