no video

I can not install MacOS (Mojave) to my PC. Basically, I boot to clover, then press enter, it starts booting, but theres no image... Verbose mode doesn't do anything, if anyone wonders. EFI is here:

Hi all, After banging my head at this for 20 hours over the past 3 days, I"m really out of ideas. The excitement I felt towards building a hackintosh has turned to despair. I could really use some help. Toggling intel and ati injections, enabling/disabling cms and dedicated graphics in bios...

Just a few days ago, I bought a second-hand graphics card on eBay. Yesterday it had a strange problem. I opened my computer in the morning, everything was normal, then I restarted, I found that my discrete graphics card does not output a signal, so I tried to plug the VGA cable into the...

Like the topic says I have a Mac Pro (Mid 2010) with a GTX 970. The problem I'm facing is that I occationally when waking the computer from sleep (feels like every 10-20 time or so) the display won't turn on and stays black. I can still SSH into the computer from another and everything seems to...

Config: GIGABYTE Z270X-UD5 Intel i7-7700k EvGA 980ti Hybrid So, I put my system together, power it up and while I get a PING noise, but I get no display. I press the delete key a few times at start up, but nothing. Not even a splash screen. I tried: HDMI (Mobo) Display 1 (Mobo) HDMI...

I wasn't sure where else to turn guys! I realize that my machine is not a Hackintosh but was hoping you all could help! I have an 8 core Mac Pro with a GTX 960 Gaming card (MSI 4GB). Every time I update the drivers for this thing, upon reboot I get no video. What I've had to do in the past is...

Hi, I'm new to hackintoshing and built my first one this week. First it was rebooting instead of powering off. It's ok now. I can put it to sleep and to wake up, but no video after that. I'm using iGPU (intel 530) I'm using iMac17,1 for now. MacPro3,1 didn't boot. Any ideas? Should I post...

Hi there, i know that is annoying reading a lot of threadas with more or less the same problem, but probably my case is another. I left my working 10.9.1 switched on, and when i came back home i found black screen, so i clicked mouse button to wake up but i realized that was already up but...

I am new to computer building, Have built it complete. I am going to use the onboard graphics card for now. When I turn the system on my MB runs like it should (i think) but i get no video out on the HDMI or Display Ports connections. any Advice as to why? does the MB Disc need to be...

I am having an issue after waking from sleep where I have no video after waking. I have a Z68x-UD3H-B3 (F8) board and an XFX AMD Radeon HD 6670 graphics card. I have been trying to get my graphics card fully recognized but it only shows 6xxx. AMD Radeon HD 6xxx: Chipset Model: AMD...

Hello I recently replaced my motherboard when the old one died after only one month of use. It boots fine now with the new one but now only the onboard graphics work. It doesn't even recognize that my card is in there. Here are my specs: Running ML 10.8.1 i7 2600k CPU Gigabyte Z77-UD3H...

I have an Alienware M17x R2 currently running Lion 10.7.4 , everything works perfect but the VGA port, here is my configuration: CPU: Intel Core Extreme T9400 2.53 Ghz cuad core 4 gb ram Single Nvidia GTX 280m Dual 500 gb Hard Drives set as AHCI no raid I purchased a copy of mountain lion...

Post install - No video [FIXED] - No audio - Mountain Lion (I previously had Snow Leopard. Reviving the Hackintosh. I used to have a clue and contributed to the community.) So I've followed the guide on the home page. Everything was going smoothly... Installed ML. Rebooted, loaded into ML...