[Solved] New Build, No Display

[He1nr1ch]

Config:
GIGABYTE Z270X-UD5
Intel i7-7700k
EvGA 980ti Hybrid

So, I put my system together, power it up and while I get a PING noise, but I get no display.

I press the delete key a few times at start up, but nothing.

Not even a splash screen.

I tried:
HDMI (Mobo)
Display 1 (Mobo)
HDMI (Graphics Card)
Display 1 (Graphics Card).

No video signal.

I've tried HDMI and Display Port from MotherBoard. Nothing.
I've tried HDMI and Display Port from the Video Card. Nothing.

The motherboard is giving me error codes like "ready to input BIOS" and such.

Any help would be lovely, as I'm looking at a really fancy and expensive paperweight.

 

[nobodynose]

Remove ALL PCIe cards from the system, connect your display to either HDMI or DisplayPort on the motherboard, and see what happens. If you get a display then, perhaps there's a problem with your graphics card...or it wasn't seated properly in its slot. Then you can try reinstalling the graphics card.

You have to eliminate multiple points of failure to track down this kind of issue. Once you get a basic configuration that powers up, then you can start adding components to see which one is causing the problem.

 

[He1nr1ch]

First, sorry for posting in the wrong forum earlier.

Second, thanks for your answer.

The problem has been solved.

My radiator fans for my water cooling were pressing down on the memory simms, possibly misaligning them. Once I loosened up the assembly and took them off the memory, I got a splash screen and was even able to install an OS.

Hackintoshing is next!