Hi please has anyone successfully enabled thunderbolt 3 on Lenovo Yoga 720 or similar laptop?
Thank you!
Build Information:
https://github.com/dikamsiyoung/Lenovo-Yoga-720-15IKB-EFI-OpenCore-0.8.3/blob/main/README.md
Hi, using an ASUS Z490 ProArt Creator,
6900 XT 16GB,
11.4 Beta 1 (just updated to 11.4 tonight)
USB Mapped!
Thunderbolt 3 configured with hotplug and cold / warm boot
With TB3 I can hot plug even with no devices connected at startup
With USB C, I cannot hot plug even with devices connected at...
Mojave build using 'vanilla' Multibeast options. Everything works great.
Recently added an internal hot-swap bay and drives connected at boot are recognized but I cannot hot-swap them.
SATA port Hot Plug is enabled in Bios.
No SATA options were check-boxed in Multibeast.
Does anyone know how...
Hello, I have noticed that the patch I used in Catalina to be able to hot plug SATA drives does not work in Big Sur. I mean this patch:
Name = com.apple.driver.AppleAHCIPort
Find = 40600200
Replace = 00000000
Comment = SATA hot plug.
It happens to someone else? How can I solve that? Thank you.
Ok, here we are!
After a long search I found something interesting and... a possible way to have Thunderbolt hotswap working!
I start this thread with the hope that finally we can create a definitive guide (or almost) to enable the thunderbolt hot swap.
If it works, it would be a turning point...
Few days ago, I clean install the 10.13.1 on my 5480, and the usb3.1 type-c hot plug works fine.
yesterday I got the Dell TB15 (TB3 dock), then TB3 is no hot plug,
I have to plug in before boot, and the type-c on the TB15 is no hot plug, either.
any idea?
Thanks
Hello,
I just did a fresh install of Sierra and almost all runs smoothly.
My USB3 works nicely when devices are plugged in before system launch, but the hotplug doesn't work so I have to restart any time I want to plug a USB3 device.
Is there any setup I should look into?
Thanks. :-)
The HDMI only work if I plugin before boot.
Here is my IOReg,
1. Unplug HDMI and reboot -> save IOReg -> IOReg_init.ioreg
2. Plugin HDMI -> HDMI no Video -> save IOReg -> IOReg_1stPlugin.ioreg
3. Unplugin HDMI -> save IOReg -> IOReg_1stUnplug.ioreg
4. Plugin HDMI and reboot -> HDMI Video...
Hello, I made a new hackintosh with the actual buyers-guide:
Mainboard: Gigabyte GA-Z97X-UD5H
OSX: 10.10.1
MultiBeast Configuration
Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Disk > 3rd Party SATA
Drivers > Disk > Intel Generic AHCI SATA
Drivers > Misc >...
hey guys, i have a couple of questions. a few of them are already in this forum, but i concentrate them here now.
my system:
Core i7-4770K - GA-Z87N-WIFI - HD4600
(this is a pc from the buyers guide)
--------------------------------------------------
Video:
i have 3 displays.
1 monitor...
I have just moved from an official Mac Pro 3,1 system to a Gigabyte z77x-up5-th based system. The PCI-e card in question (purchased here: http://www.pc-pitstop.com/sata_raid_controllers/r622.asp) is the RAID-less version of the RocketRAID 622 card. It has the Marvel 88SE9123 chipset which has...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.