Hello,
I recently built a hackintosh with an gigabyte nvidia GTX 950 graphics card on OSX Sierra. Everything works when using the latest web driver 367.15.10.15f03.
The card has a "silent" mode where the fans will turn off under low load. While gaming, the card will perform great. The card...
Hello everyone and thanks for this wonderful page.
I have a hackintosh with a GA-Z170X-Gaming 3, Cpu i5 6600K and a cooler Artic Freezer 13.
Most are working perfectly but I have a problem with the fan and I have not found any information.
The fan is always working at 1500 RPM and it is...
Ever since, I've upgraded to Sierra, I can't get the sound to work.
In fact, no audio devices are even found.
I've tried:
- audio_cloverALC-120_v1.0b0
- and also audio_codecdetect_v2.0
- Multibeast driver for Realtek ALC889
These potential fixes are from the No Audio Devices sticky guide.
I...
Hello.
I have Gigabyte motherboard GA-EP45-DS3 (rev. 1.0) - Intel® P45 + ICH10 Chipset
http://www.gigabyte.com/products/product-page.aspx?pid=2843#ov
In Windows, I can slow down CPU cooler with "EasyTune" or "SpeedFan" program.
Now I trying to install OS X El Capitan 10.11
Bootloader...
I've been trying for a while now to get hwmonitor and istat menus to show my fan rpm speed,but without any success
In HWMonitor Version 5.3.1100 i get my system fan to show rpm speed but using latest hwmonitor or istat menus i only get cpu heatsink to show from my smcd device,without fan.
I'm...
I just did a fresh install with a Z87 Gigabyte and 10.11.3. For some reason, when OSX boots the CPU fan speed goes to 1000 RPM.
After messing around with various fan speed controllers, it seems something is setting up the minimum fan speed to 1000 RPM, and I can't go lower than that.
I've...
Hi all.
I just got into the Hackintosh scene a couple of weeks ago, and got 2 Hackintosh builds up and running from doing a lot of reading on tonymacx86, ******/r/Hackintosh,OSXLatitude, InsanelyMac…
I got a Desktop configured, which was relatively easy compared to getting OSX running on my...
Hello guys,
I'm ordering 2 new, silent fans for the original rear fan assembly of the G5. I want just one cable running to the motherboard. Does a y-splitter something special with the PWM signal or something or can i just cut of the connectors and solder the wires together?
Hi, I am a Hackintosh user
I am having problems with fan RPM
My graphic card is GT 740
The temperature of GPU is always around 24~5
Also GPU fan RPM is 1200RPM
I don't play games but I edit videos
I tried to drop RPM by using HWMonitor, smcFanControl, Macs Fan control, etc
But it is able to...
Well just upgraded from a Galaxy Geforce Nvidia 680 GC 2GB to a EVGA 970 SSC ACX 2.0+ and I have the drivers installed and everything works HDMI and so on, plist edited. Noticed The fans turn off once OS X loads and they twitch every 10 seconds like they're trying to kick on. Do I need to edit...
Hey everyone,
Soory for my bad english skills, but it´s not my native language.
A few weeks ago, i installed OS X 10.10 on my new Hackintosh.
The Bootloader i used is CLOVER (i don´t know what to check there for my hardware...)
I also installed Adobe After Effects CC 2014.
My problem is:
Every...
Hi all,
I've been trying to get fan control working on my laptop for quite some time now (I gave up a little bit, but the want is still there). I don't really need it, but I want it to manually control fan speed for some cases (i.e. gaming) when automatic fan control from ACPI / BIOS isn't good...
Hi guys, I'm new to HWSensors / Monitors / Kexts as I am looking for a way to check my build temperatures / fans etc.
I read some posts and troubleshooting but I think I'm missing something - maybe you can help me!
I run 10.10.1 with Multibeast 7.7.1
Build: Gigabyte GA-Z87X-UD3H / i5-4570...
Hi,
I'm wondering if I can get the RPM's of my single fan in my Asus S400CA to be recognized in HWMonitor? The fan works fine; it spins at a low RPM or turns off entirely when idle and spins up when I'm doing something intensive (gaming, editing, etc). However, it never shows in HWMonitor...
I just did a clean install and having issues with the CPU Fan not increasing RPMs to keep the CPU cool. Initially i thought there maybe time for new thermal compound so I went ahead and replaced it cleared out any dust in the area. I could swear i ran into this when i did my last clean install...
I am using Maverick 10.9.2 and just updated my system with Multibeast 6.3.0.
Strangely enough after booting up, the system fan stops. CPU fan is still running.
Appears to have a voltage decrease on the system fans.
Has anyone encountered this issue or know a fix?
Hi.
The Corsair H80i is a popular closed loop water cooler that a lot of people use to cool their i5/i7 processors.
Here is a short guide to control your fans from within your OSX Mavericks installation
What you need:
OSX Mavericks
Corsair H80i with the usb header plugged in
A...
I have successfully made my first build :thumbup:
I've a Nocua NH-U12P that comes with 2 fans (3 pins) mounted on a Gigabyte GA-Z87MX-D3H motherboard.
The fans are always at 1300, I would like to know what are the possibilities to let the system control the fan speed based on CPU temps.
I've...
Thanks, Rehabman and all!
My Mavericks install went fine.
I had two minor problems that I just need pointers on.
The first is that the fan keeps going into screaming turbo jet mode. I'm fairly sure that I selected the standard fan kext, but which one keeps it the quietest...
Can i control the speed fan of my hackintosh?
I have installed hwmonitor from multibeast and the fan speed is very slow causing the overheating of my hard disk.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.