cpu

Hellow everyone. Im new to mac-Hackintosh and i have seen many videow that thanks to YOU ALL (Hackintosh instructions, tutorials, step-by-step how to guides) have made it sucsess to build hackintosh machines. Some of the components i have seen that work (cpu, Motherboard) but i dont know about...

Hi, sorry for opening another thread. :( As the title says, the CPU idles at maximum frequency. I have tried to generate SSDT with ssdtPRGen.sh, same problem. kextstat|grep -y acpiplat 15 2 0xffffff7f8291c000 0x9c000 0x9c000 com.apple.driver.AppleACPIPlatform (6.1)...

Hi there! My CPU fan is just driving me crazy. 100% RPM starts on booting screen and not stopping till shutting down. CPU is cold as hell (sorry for that oxymoron). I'm not able to control fan speed neither with HWMonitor nor with any other fan manager. What I've done: 1) Freshly installed...

I'm a bit worried that my Hack 10.13.3 won't be able to boot if I update my CPU. Anyone tried yet? I have Z87X motherboard with a very very old BIOS.

So I've gotten 10.13.3 mostly installed, but I can't for the life of me get it running stable with my CPU. The only way I can get it to boot is with some variation of "cpus=". Usually I can boot with cpus=1, but only have one cpu thread active. Sometimes, however, I can boot with cpus=10 and at...

So I've gotten High Sierra mostly up and running. The one issue I can't seem to figure out is how to utilize all 6 cpu cores. I can't boot without cpus=1 hince why I can only utilize 1 core. I installed with clover, but have also tried installing multibeasts 6-core cpu driver with no luck. If I...

Hi, I'm not able to boot with any multibeast 9.0, 9.1 and 9.2. Sierra. I got the right Bios setting. Got a brand new GA-Z170X-UD5 board, crutial memory and i7-7000k intel, using onboard video. I've used imac 14.2 on all my previous hack, still I'm guessing this is not the problem here. Will...

What do we do? New drivers? Patches? I've heard as long as you're running MacOS High Sierra 10.13.2 you're fine.

I have installed the latest Hwsensors 6.16.1372 and then have placed the Fakesmc.kext in folder named "10.13" from "Other" (Is that where it is suppose to be btw?). As a last result I've installed Intel Power Gadget. None of these made the CPU temp sensors appear. Anybody know what to do? Thanks!

Hello, And before you will start to say it is impossible to get GT1 graphics to work or it is not supported by Apple, I would like to share here some of my research. We will talk only about 0x16068086 this one I have with my 3205u processor. Let start from the beginning. We will briefly go...

My Sierra works perfectly if I constantly use it. After leaving it there for one minute or so, I am back to use it again. It works fine for a few sec, but then it began to lag(super lag but still working). Around 20sec later, it automatically fixed the lag. To find out the reason, I launched...

I have built a working hackintosh everything seems to be good except my gpu fans I have a gtx 1070 and they don’t spin no matter what kind of load I have. I can’t view the temps of cpu or gpu but my cpu fans change speed as load increases and decreases. I’ve read stuff about ddst or something...

Hello everyone, I'm going backwards and forwards between the 6850k, 6900k, 7280k & 7900x and thought I would seek some advice. Intended use: The production of 360 degree virtual tours and gigapixel panoramas. The files I work with are huge (50GB+). My current hack has a 2600k with 32GB RAM...

Looking to build and was hoping to build an 8 core machine but noticed there are none listed in the buyers guide. Has anyone tried this yet? Cheers!

Hi all, I have a nicely working build with a i7 6700K and I would like to upgrade to i7 7700K and my question is if it will work OOB or if I will need to change anything? I run Sierra 10.12.6 with an iMac 17,1 definition (iMac Retina 5K, 27-inch, Late 2015). My MoBo should support the CPU...

Hello All After years of toying with the idea of building a Hackintosh I am finally ready to take the plunge. I have been reading many build posts and build guides from this site. I have a question concerning the Motherboard and CPU. First let me start off by saying I am using the...

Hi, I have installed macOS 10.13 High Sierra (clean install) on my PC and @RehabMan Kexts to monitor temperatures and other stuff with HWMonitor. I'd like to avoid the processor to reach 4.4GHz in order to reach a maximum of 4.1 GHz, but I'm unable to do it! I tried the following: Disable Intel...

Guys, I'm trying to solve this problem for weeks now. I'd appreciate any help. Thank you. The problem: I want to undervolt my cpu and reduce RAM speed, but whenever I reboot or shutdown out of Mac OS, my CPU voltage goes to auto as well a RAM multiplier. Under Windows everything work as...

Hello kind people, I've been reading through this site a few weeks now, and i think i will give my own hackintosh a shot. I have some concerns due to the launch of Intels new Coffee lake architecture. As some of you have pointed out, these new chips wont be natively supported for quite some...

You may have noticed that your CPU runs at its max clock speed on a vanilla hackintosh install. This is bad for two reasons - it is actually slower than the normal stepping curves Intel generates (no turbo boost), and wastes a ton of power/CPU life. Fear not - you can inject an SSDT into Clover...