Contribute
Register

[SUCCESS] Maverickintosh - Z77-DS3H Rev.1.0 F9 - i5 2500K - HD6850 - 16GB - ML 10.9

Status
Not open for further replies.
galavs said:
Installation Hacintosh fails ...

Please download the bios setup F11a and DSDT.aml for Z77-DS3H ...

My PC:
Intel Core I7-2600
Z77-DS3H bios F11a
24Gb Ram 1333 Mhz
Nvidia Geforce 550Ti
Click to expand...

Set BIOS to Optimised Defaults then SATA to AHCI, VT-d to Disabled for your i7 2600.
Connect the monitor to the on-board DVI connector - VGA is not supported.

DSDT.aml is not required for this board.

Boot with -v -x

As we only have one part in common (Motherboard) this may not be the best build guide for you to follow.

Good Luck
 
Current Rig (Shoutout to Casey!)
Z390 DESIGNARE |  i7 9700K |  Vega 56 8GB
Retired Rig (7 years!)
GA-Z77-DS3H |  i7 3770K |  GeForce GTX 760
hello
I made instalacion.but, restarting stays frozen in the gray apple screen.
What I can do?
 
tifonete said:
hello
I made instalacion.but, restarting stays frozen in the gray apple screen.
What I can do?
Click to expand...

Firstly, you can enter the details of your hardware in your profile as required by the forum rules
"Profiles need to contain at least your primary system to assist others with helping you."

Secondly, you can start your own thread asking for assistance in Mavericks Desktop Support.

Boot with -v and post a good quality picture of the screen when it stops to maximise your chances of a quick resolution of your problem.

Good Luck
 
Hello . I have revision 1.1 and no audio. Anything else, except audio and FCPX, works fine.
 
I can't get mine to boot without -x. I follow this guide on every detail. Also my audio doesn't work at all.
 
verdazil said:
Thank you. For me works fine on MB - GA-Z77-DS3H, CPU - i7-3770, graphics - HD4000
Click to expand...

Hey I have the exact same setup with processor and HD4000 Graphics. But I can't get it to boot without "-x". How do I make it bootable?
 
pdxxjjeep said:
I can't get mine to boot without -x. I follow this guide on every detail. Also my audio doesn't work at all.
Click to expand...

Which motherboard do you have ? 1.0 or 1.1 ?
What version is your BIOS ?

For your Audio select ALC887 in Multibeast.

Try booting with GraphicsEnabler=Yes (or GraphicsEnabler=No)

This guide is for a specific set of parts and if you have different parts, maybe that is the reason it isn't fully working for you.

Consider starting your own thread asking for assistance in Mavericks Desktop Support Link
Boot with -v and post a good quality picture of the screen when it stops.

Good Luck with your build
 
If you notice that was a reply to a specific individual who stated they had the same set up as me.
Mine is Rev. 1.1 F9 i7 3770 HD4000 graphics. Mavericks
It hangs on the gray apple screen every time.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top