- Joined
- Oct 17, 2011
- Messages
- 93
- Motherboard
- GA-z77n WiFi
- CPU
- i5 2500
- Graphics
- Asus 660Ti
- Mac
- Classic Mac
- Mobile Phone
Yeah I think your right and was making over complicated
So for all folks using the "Z68X-UD5-B3" the installation of ML is painless. Just keep it simple and don't do what I did and over think it and make it more complicated than it has to be.
These are the steps I did:
1. Use the unibeast tut. - Tonymac's x86 Unibeast 1.5.2 tut works. Just do one step at a time. I believe that will eliminate 80% of the problems people are having.
2. Once booted from unibeast, and you have done the ML installation thing. (I didn't log into iTunes or App Store. and I wasn't connected to the internet) I run the latest MB (4.6.1) I choose "UserDSDTInstall" and "Repair Permissions" ONLY.
3. Rebooted from my SSD. with no panic's, so now yr on the dektop now. I plugged in the ethernet cable. Open safari too check to see your online.
4. I then logged into iTunes, app store and iCloud. all without drama or errors.
5. I opened MB again and this I selected "UseeDSDT" "Repair Permissions" and "ALC8xxHDA" and "AppleHDA Rollback"
6. Rebooted once again, No panics or errors.
7. Open MB again the same things as last time but I added "Trim" since I use a Sandisk Extreme 240gb SSD
8. Rebooted again
9. Added in my Fav apps from my Lion Time Machine.
10. Rebooted. no panics no errors.
What is working:
- sleep and wake. I just hit the " ESC" button on keyboard and about 1 sec delay and she wakes up ready to use, mouses moves and keyboards types.
- All usb ports are working front and rear. I even pulled then out, without using the right click "eject". Which can give you grief some times.
- DVD Rom eject using " F12" and also the eject icon which is on the top menu bar.
Whats not working?, Nothing so far. If you want to test and try please post and I will try too.
Now its time to start to crank it up. The speeds I posted are a bit down I think as I was running iTunes plus doing a back up with Time machine while doing them
Heres pic's just for fun
So for all folks using the "Z68X-UD5-B3" the installation of ML is painless. Just keep it simple and don't do what I did and over think it and make it more complicated than it has to be.
These are the steps I did:
1. Use the unibeast tut. - Tonymac's x86 Unibeast 1.5.2 tut works. Just do one step at a time. I believe that will eliminate 80% of the problems people are having.
2. Once booted from unibeast, and you have done the ML installation thing. (I didn't log into iTunes or App Store. and I wasn't connected to the internet) I run the latest MB (4.6.1) I choose "UserDSDTInstall" and "Repair Permissions" ONLY.
3. Rebooted from my SSD. with no panic's, so now yr on the dektop now. I plugged in the ethernet cable. Open safari too check to see your online.
4. I then logged into iTunes, app store and iCloud. all without drama or errors.
5. I opened MB again and this I selected "UseeDSDT" "Repair Permissions" and "ALC8xxHDA" and "AppleHDA Rollback"
6. Rebooted once again, No panics or errors.
7. Open MB again the same things as last time but I added "Trim" since I use a Sandisk Extreme 240gb SSD
8. Rebooted again
9. Added in my Fav apps from my Lion Time Machine.
10. Rebooted. no panics no errors.
What is working:
- sleep and wake. I just hit the " ESC" button on keyboard and about 1 sec delay and she wakes up ready to use, mouses moves and keyboards types.
- All usb ports are working front and rear. I even pulled then out, without using the right click "eject". Which can give you grief some times.
- DVD Rom eject using " F12" and also the eject icon which is on the top menu bar.
Whats not working?, Nothing so far. If you want to test and try please post and I will try too.
Now its time to start to crank it up. The speeds I posted are a bit down I think as I was running iTunes plus doing a back up with Time machine while doing them
Heres pic's just for fun