[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[akasha]

Hello guys, I'm following the guide to solve some Thunderbolt issues... I have a Z390 Pro, but, unfortunately, my Audio interface (Apollo Twin) has a Tthunderbolt cable. I put it in the "USB-c" slot behind the motherboard. But the system told me that I can't use Thunderbolt devices on the Mac. Do you guys have any solution? I Googled a lot and searched, but I didn't find anything. So, if anyone has some useful links or any answer about my problem, please let me know..

Thanks in advance.

 

[roastable]

I'd like to add a third bootable NVMe PCI-e drive. Does anyone have experience with a bootable PCI-e to NVMe adapter?
Thanks.

I purchased this adapter. Been working amazingly well and at full speed from what I gather.

 

[EliM]

I'd like to add a third bootable NVMe PCI-e drive. Does anyone have experience with a bootable PCI-e to NVMe adapter?
Thanks.

I bought this one and it works fine. https://www.amazon.com/gp/product/B07F9RBP5W/?tag=tonymacx86com-20
I wanted it to be the full size PCIe as the first smaller size slot was blocked by my video card and then second was used by the Fenvi.

 

[WhosMac]

@CaseySJ here is the Clone Log. this is using EFIClone Log v5

[Sat Jan 4 16:04:26 EST 2020] - Catalina : destinationVolume name has been renamed to /Volumes/Hackintosh- Backup
[Sat Jan 4 16:04:26 EST 2020] - sourceVolume = /
[Sat Jan 4 16:04:26 EST 2020] - sourceVolumeDisk = disk2
[Sat Jan 4 16:04:26 EST 2020] - destinationVolume = /Volumes/Hackintosh- Backup
[Sat Jan 4 16:04:26 EST 2020] - destinationVolumeDisk = disk3
[Sat Jan 4 16:04:26 EST 2020] - sourceEFIPartition =
[Sat Jan 4 16:04:26 EST 2020] - destinationEFIPartition =
[Sat Jan 4 16:04:26 EST 2020] - efiBootPartitionUUID =
[Sat Jan 4 16:04:26 EST 2020] - efiBootPartitionDisk =
[Sat Jan 4 16:04:26 EST 2020] - No SourceEFIPartition Found, script exiting.


Looks like its not determining my EFI partition, when I select Source and Destination should I select main drive or the one listed as the "data" drive?

 

[jiffyslot]

Hello guys, I'm following the guide to solve some Thunderbolt issues... I have a Z390 Pro, but, unfortunately, my Audio interface (Apollo Twin) has a Tthunderbolt cable. I put it in the "USB-c" slot behind the motherboard. But the system told me that I can't use Thunderbolt devices on the Mac. Do you guys have any solution? I Googled a lot and searched, but I didn't find anything. So, if anyone has some useful links or any answer about my problem, please let me know..

Thanks in advance.

See page 1 of this guide.

 

[CaseySJ]

@CaseySJ here is the Clone Log. this is using EFIClone Log v5

[Sat Jan 4 16:04:26 EST 2020] - Catalina : destinationVolume name has been renamed to /Volumes/Hackintosh- Backup
[Sat Jan 4 16:04:26 EST 2020] - sourceVolume = /
[Sat Jan 4 16:04:26 EST 2020] - sourceVolumeDisk = disk2
[Sat Jan 4 16:04:26 EST 2020] - destinationVolume = /Volumes/Hackintosh- Backup
[Sat Jan 4 16:04:26 EST 2020] - destinationVolumeDisk = disk3
[Sat Jan 4 16:04:26 EST 2020] - sourceEFIPartition =
[Sat Jan 4 16:04:26 EST 2020] - destinationEFIPartition =
[Sat Jan 4 16:04:26 EST 2020] - efiBootPartitionUUID =
[Sat Jan 4 16:04:26 EST 2020] - efiBootPartitionDisk =
[Sat Jan 4 16:04:26 EST 2020] - No SourceEFIPartition Found, script exiting.


Looks like its not determining my EFI partition, when I select Source and Destination should I select main drive or the one listed as the "data" drive?

EFIClone-v4 and EFIClone-v5 should not be used -- they're not functional. Apologies for not being clear about this earlier. I'll remove them both shortly.

 

[samtimbaud]

Hi Casey and all,
I wish you the best for this new year!

After made a GB5, I noticed that my frequency memory was not at the right value. D you have to make a particular adjustment? Normaly the memory are 3200MHz.

Thank you.

up !

 

[WhosMac]

EFIClone-v4 and EFIClone-v5 should not be used -- they're not functional. Apologies for not being clear about this earlier. I'll remove them both shortly.

So I should still attempt to use v3 the clone the drive? For now I used CCC to clone the main drive and then mounted both the EFI Partitions and copied my EFI folder over.

 

[Anim8me2]

You can used the updated EFImounter v3.1 in the forum's /Download/Community Software/. (See top of page, menu.)

Or EFI Agent. (See sticky post in forum's General Help forum section.)

Yup... tried it. Returns an error.

 

[Stork]

Yup... tried it. Returns an error.

Need more information than that. Which one of the two mounters worked and which one did not. ...on what version of macOS.

FYI @MacMan.