- Joined
- Mar 16, 2017
- Messages
- 33
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i7-9700K
- Graphics
- RX 580
- Mac
- Mobile Phone
Thanks for the advice and sorry for the delay in my response but I could not try before yesterday. However, the situation is this, after many attempts the problem should be a Ballistix Sport RAM that makes the system unstable preventing the system from starting. So Clover works, and it's not an update problem by mistake but I can't accept that after only 6 months a new RAM burns. Can the product warranty help me? Could it have been due to a power surge? In any case, could you recommend a bank of RAM that is certainly compatible and above all reliable?These symptoms indicate a corrupted CMOS, so yes, please perform a CMOS reset by shorting the two designated pins on the motherboard with a flathead screwdriver. Please follow instructions in the Designare owner’s manual. It’s an easy and safe procedure. One should be careful, but not afraid to do this.
If the system then boots up and Clover menu appears, choose the item that says:
Boot MacOS Install from Mojave.
In other words, look for a boot disk with the word “install”. This will allow the 10.14.6 update to take place.
Thanks in advance