- Joined
- May 16, 2016
- Messages
- 290
- Motherboard
- Asus Prime Z370-A II-1001
- CPU
- i9-9900K
- Graphics
- RX 5700
- Mac
- Mobile Phone
the only issue I've had with sleep is after a (seemingly) random number of cycles, when I wake it I've lost audio ("internal speakers", rear green port). the fix is a restart.Just performed four successful sleep/wake cycles in a row (no darkwake). Each cycle consisted of:
- Apple Menu --> Sleep (user triggered sleep instead of idle sleep)
- Let the system sleep for 30 to 40 seconds
- Press key on keyboard to invoke Stage 1 Wake (partial wake)
- Wait 10 seconds
- Press key again to invoke Full Wake (monitor turns on, login prompt appears)
- Then use the system normally for 5-10 minutes
- Return to Step 1 three more times
This is interesting, I'm using Darkwake=0 and my Watch will unlock my Hack just fine. I do have proximityWake set to 0 (off) so it's not waking up automatically when I walk in the room, but I hit a key or bump the mouse I'll get a fully up and ready (logged in) computer with in seconds.FYI. I found that darkwake=10 is the solution. Takes a bit longer to wake from sleep but unlocks with my Apple Watch every time now.
EDID product number 5b11. Year 2017. Serial number starts with 7.@joevt I haven't got the txt from my friend that got the new LG 5k with a 2017 MBP. BUT I got another .txt from another friend who has the old LG 5k with a 2016 MBP. Attaching it here
EDID product number 5b74. Year 2019. Serial number starts with 9. Both EDID's are similar to the corresponding EDID's of the 2017 model except for two timing differences:@joevt and this is another one, new 2019 LG Ultrafine 5k with MBP from 2016. Sorry I'm yet unable to find someone with both 2018 MBP and 2019 LG Ultrafine
Since both connections have the same product and vendor ID and date of manufacture, there is no way to override the EDID of the second connection using the /System/Library/Displays/Contents/Resources/Overrides method. Well, there's a mtdd file for dual link/dual cable displays as well as the main override file for the display. The overrides folder for LG displays (1e6d) has overrides for both 5b11 and 5b74. I think 5b10 and 5b7b are 4K displays.
@JingleDjango
[...]I set the Apollo as my main driver and was able to record / playback a large session at 32 samples and 64 samples via thunderbolt with no problems.[...]
Maybe it's a problem with Protools? Do you have any other DAWs installed on your computer to test?
The best time to change system definition is before licensing or registering a large number of applications and plug-ins. This is because a new system definition is equivalent to a new computer, which means applications and plug-ins must be re-licensed.@CaseySJ in the original guide you defined different SMBIOS settings based on which version of 10 your 14.5 update guide you make no mention of SMBIOS or system definition.
Now that I've updated, would it be wise to change my system definition to iMac 19,1?
** Final Cut Pro Users **Hi Casey/Hackers
I have not seen BruceX Scores better than 7s-ish,
I was wondering if this was just coincidence or the test is too short for new systems.
Wanting to upgrade to a Designare / 9900k system, trying to see if it will be any faster.
I recently got two RX580s to work in my old X79/4930k system, and the scores are surprisingly good.
Attached is an updated BruceX Test,Could you please run this
Standard 5k
5K X5 (which is just 5 copies of the original)
New 8k Version
My System (ProRes 422)
Mojave 10.14.6 | Final Cut Pro X 10.4.6 | Dual RX580's
Bruce-X - 5K . <9s
Bruce-X - 8K . <20s
Bruce-X - 5K X5 >41s