Windows Update/Install no success with Clover on Lenovo Y50-70

[Shad0walker]

You should create a USB as per guide and see if you can boot from that:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

After, you're able to boot, you can update everything according to the Y50 guide.
If you're not able to boot (maybe your system is corrupt), do a fresh install and restore files from backup.

How is it corrupt? I get this problem after i'm reinstalled windows 10... I don't touch the os x system...

 

[RehabMan]

How is it corrupt? I get this problem after i'm reinstalled windows 10... I don't touch the os x system...

If you partitioned your drive incorrectly in Winodws (for example, partitioned as MBR/GPT hybrid), you could corrupt your OS X partition.

 

[Shad0walker]

If you partitioned your drive incorrectly in Winodws (for example, partitioned as MBR/GPT hybrid), you could corrupt your OS X partition.

I'm installed windows 10 using USB, formatting partition(win 10) and installing it. If this is the cause, How can i recovery OS x without loss data? I haven't a backup

 

[RehabMan]

I'm installed windows 10 using USB, formatting partition(win 10) and installing it. If this is the cause, How can i recovery OS x without loss data? I haven't a backup

You should boot the installer from USB and check your system volume to see if it is ok (also Disk Utility can sometimes be used to repair a corrupt volume).

You obviously should have had a backup... (backups are something you create before you need them).

 

[Shad0walker]

You should boot the installer from USB and check your system volume to see if it is ok (also Disk Utility can sometimes be used to repair a corrupt volume).

You obviously should have had a backup... (backups are something you create before you need them).

ImI installed clover on USB using your guide, it show me only OSX and its recovery volume, it doesn't see Windows partition. I'm tried to boot osx without success. So, what i may to do, download El capitan, install it on a USB and try to repair volume with disk utility? Or thereth is a better way to maker it easier?

 

[RehabMan]

ImI installed clover on USB using your guide, it show me only OSX and its recovery volume, it doesn't see Windows partition.

It means you likely installed Windows in legacy mode. As per guide, you should h ave installed in UEFI (and it brings more evidence to suggest you likely corrupted your OS X partition by partitioning the HDD in the wrong way).

I'm tried to boot osx without success.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Did you boot the installer so you could run Disk Utility and check/repair your system partition? (if it is even possible)

So, what i may to do, download El capitan, install it on a USB and try to repair volume with disk utility? Or thereth is a better way to maker it easier?

You should already have a USB with the installer on it... because how else could you have installed in the beginning?

 

[Shad0walker]

It means you likely installed Windows in legacy mode. As per guide, you should h ave installed in UEFI (and it brings more evidence to suggest you likely corrupted your OS X partition by partitioning the HDD in the wrong way).



No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Did you boot the installer so you could run Disk Utility and check/repair your system partition? (if it is even possible)



You should already have a USB with the installer on it... because how else could you have installed in the beginning?

I lost all hdd /partitions... So, i must install everything again. I need of a OS X / Win dual boot configuration, with a system that i can update them without problem.
1° Which i should install before (OSX or win)?
2° Q : U recommend me to install high Sierra or it's early (so it has bugs yet), so it's better use El capitan ? I use it for work (dj set live and daw production, so i can't have problems of compatibility )
3° Q : how can i install Windows in GPT /uefi without corrupt hdd?

 

[Shad0walker]

I lost all hdd /partitions... So, i must install everything again. I need of a OS X / Win dual boot configuration, with a system that i can update them without problem.
1° Which i should install before (OSX or win)?
2° Q : U recommend me to install high Sierra or it's early (so it has bugs yet), so it's better use El capitan ? I use it for work (dj set live and daw production, so i can't have problems of compatibility )
3° Q : how can i install Windows in GPT /uefi without corrupt hdd?

I haven't a SSD and i use mainly Logic Pro X and Traktor pro 2

 

[Shad0walker]

It means you likely installed Windows in legacy mode. As per guide, you should h ave installed in UEFI (and it brings more evidence to suggest you likely corrupted your OS X partition by partitioning the HDD in the wrong way).



No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Did you boot the installer so you could run Disk Utility and check/repair your system partition? (if it is even possible)



You should already have a USB with the installer on it... because how else could you have installed in the beginning?

I'm formatted the USB installer... I did need of it. I'm downloaded it again, can u answer my questions, Please? I should continue..

 

[RehabMan]

I'm formatted the USB installer... I did need of it. I'm downloaded it again, can u answer my questions, Please? I should continue..

Advice already given in post #20.