- Joined
- Nov 10, 2013
- Messages
- 30
- Motherboard
- HP ZBook G2 15 - Clover
- CPU
- i7-4910MQ/HM87
- Graphics
- AMD FirePro M5100/Intel HD 4600,1920x1080
Hi, My name is Yui, I just follow the guide to install 10.12.6 on my laptop,
My laptop is Dell Latitude 5480, its spec as below:
BIOS Version 1.6.3
CPU Intel i7 7820HQ
RAM Kingston DDR4 2400 16G x 2
MB Chipset Intel CM238
SSD TOSHIBA THNSNK256GVN8 M.2 2280 256GB
Audio Realtek ALC3246
Graphics Intel HD Graphics 630 + NVIDIA GeForce 930MX
Ethernet Intel Ethernet Connection I219-LM
WIFI/BT Intel Dual Band Wireless-AC 8265
Touchpad ALPS I2C touchpad
Thunderbolt 3 Controller Intel JHL6340
SD card reader Realtek PCIe SD Card Reader
SmartCard reader Broadcom 5880 USB PCSC
Camera Realtek 720p HD Camera
When the config.plist without any patch, the HDMI does not work.
the connector-type of the AppleIntelFramebuffer@1 is <00 08 00 00> without display0
After I add com.apple.driver.AppleIntelKBLGraphicsFramebuffer patch
replace 02040a00 00080000 87010000 03060a00 00040000 87010000 ff000000 01000000 20000000
to 01050900 00040000 87010000 02040a00 00040000 87010000 ff000000 01000000 20000000
then the HDMI works, but no audio.
the connector-type of the AppleIntelFramebuffer@1 is <00 04 00 00> with display0
I follow this guide for HDMI audio,
https://www.tonymacx86.com/threads/...o-sandy-ivy-haswell-broadwell-skylake.189495/
But when the connector-type is <00 04 00 00>, the HDMI do no work.
I’m confused, how could I enable the HDMI audio? Please help.
Thanks
Regards,
Yui
My laptop is Dell Latitude 5480, its spec as below:
BIOS Version 1.6.3
CPU Intel i7 7820HQ
RAM Kingston DDR4 2400 16G x 2
MB Chipset Intel CM238
SSD TOSHIBA THNSNK256GVN8 M.2 2280 256GB
Audio Realtek ALC3246
Graphics Intel HD Graphics 630 + NVIDIA GeForce 930MX
Ethernet Intel Ethernet Connection I219-LM
WIFI/BT Intel Dual Band Wireless-AC 8265
Touchpad ALPS I2C touchpad
Thunderbolt 3 Controller Intel JHL6340
SD card reader Realtek PCIe SD Card Reader
SmartCard reader Broadcom 5880 USB PCSC
Camera Realtek 720p HD Camera
When the config.plist without any patch, the HDMI does not work.
the connector-type of the AppleIntelFramebuffer@1 is <00 08 00 00> without display0
After I add com.apple.driver.AppleIntelKBLGraphicsFramebuffer patch
replace 02040a00 00080000 87010000 03060a00 00040000 87010000 ff000000 01000000 20000000
to 01050900 00040000 87010000 02040a00 00040000 87010000 ff000000 01000000 20000000
then the HDMI works, but no audio.
the connector-type of the AppleIntelFramebuffer@1 is <00 04 00 00> with display0
I follow this guide for HDMI audio,
https://www.tonymacx86.com/threads/...o-sandy-ivy-haswell-broadwell-skylake.189495/
But when the connector-type is <00 04 00 00>, the HDMI do no work.
I’m confused, how could I enable the HDMI audio? Please help.
Thanks
Regards,
Yui