- Joined
- Apr 4, 2017
- Messages
- 1,131
- Motherboard
- ASUS Z270 ROG MAXIMUS IX HERO
- CPU
- i7-7700K
- Graphics
- Vega 64
- Mac
- Mobile Phone
BTW, I let the computer sleep for 3 days - no problem on wakeup.
As noted in the updates section of the OP, a Logitech MX Master. The downside to the bluetooth is that since I turned the board's BT controller off (allowing for the Fenvi card instead), the mouse is not seen by the BIOS interface. That is not really an issue as you can easily get to everything in BIOS by relevant keystroke.Which mouse are you using exactly?
I take it you were able to boot/install once that kext was in place?Thank you for this great tutorial. It will be helpful when I build my cousin's Hackintosh. He is an Asus HERO mobo lover!
If I may, this is what I learned when using a USB 3.0 flash drive to install Sierra. You will need Rehabman's XHCI-200-series-inject.kext in the EFI/CLOVER/kexts/Other folder in order to use a USB 3.0 flash drive. Do this or stick with a USB 2 drive like you have already stated in your tutorial. I spent over 2 days figuring out this issue when I was building my rig.
Yes, once the kext is in place, I am able to boot with a USB2/USB3 drive. If I remove the kext, it will only boot with a USB2 drive.I take it you were able to boot/install once that kext was in place?