- Joined
- Nov 15, 2011
- Messages
- 30
- Motherboard
- Asus PRIME Z370-A
- CPU
- i7 8700K
- Graphics
- RX 5700 XT
Finally I found some time to take care of my build, everything I need seems to be working fine although I did not tested few things yet (USB 3.0 etc.).
I'm a bit time restricted therefore this is not a guide per se, but here's how I succeeded with my build:
0. UEFI settings as per usual for ASUS
1. I have created bootable USB as per: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/
2. I've added few kexts (EFI.zip) attached
3. This whole thing booted without an issue, and I performed clean install (APFS)
4. After installation I have upgraded to 10.13.1 and installed latest nVidia drivers
5. Ethernet worked out of the box
6. I had issues with audio, I resolved them the following way:
- I have installed 'ALC1220A (ASUS ROG STRIX Only) and 100/200 Series Audio drivers from MultiBeast - device was detected, but there was no sound
- then I followed: https://www.tonymacx86.com/threads/no-sound-realtek-alc-applehda-guide.143750/#post886717 this guide and installed 'FakePCIID.kext' and 'FakePCIID_Intel_HDMI_Audio.kext' <-- that one wasn't necessary I guess since I do not use HDMI audio.
So - audio/video/network works without any issue, I'll update this post later on. I hope that will help somehow ;-)
I'm a bit time restricted therefore this is not a guide per se, but here's how I succeeded with my build:
0. UEFI settings as per usual for ASUS
1. I have created bootable USB as per: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/
2. I've added few kexts (EFI.zip) attached
3. This whole thing booted without an issue, and I performed clean install (APFS)
4. After installation I have upgraded to 10.13.1 and installed latest nVidia drivers
5. Ethernet worked out of the box
6. I had issues with audio, I resolved them the following way:
- I have installed 'ALC1220A (ASUS ROG STRIX Only) and 100/200 Series Audio drivers from MultiBeast - device was detected, but there was no sound
- then I followed: https://www.tonymacx86.com/threads/no-sound-realtek-alc-applehda-guide.143750/#post886717 this guide and installed 'FakePCIID.kext' and 'FakePCIID_Intel_HDMI_Audio.kext' <-- that one wasn't necessary I guess since I do not use HDMI audio.
So - audio/video/network works without any issue, I'll update this post later on. I hope that will help somehow ;-)