(SUCCESS) Gigabyte Z390 UD -Open Core 0.6.3

[Feartech]

Has anyone managed to solve the USB 2.0 and 3.0 issue? Or can anyone point to the AML file that works?

I've started with the original and everything still works really well, except until Monterey upgrade (I suspect). Some of you might have read this issue. By changing xhciPortLimit in config to true 3.0 works, but doesn't recognise anything with 2.0, e.g. USB 2 thumb drives, mouse, keyboard, even my USB 2/3 hub. If set to false, then all the 2.0 things that didn't work, work but my USB 3.0 thumb drive, hard disk, don't get recognise.

Thanks in advance!!!

xhciPortLimit is broken in Big Sur and Monterey (keep in mind this thread is in Catalina section post in Monterey if you are using that....)

make sure to do this in Catalina:

The New Beginner's Guide to USB Port Configuration

Pre-amble When I originally wrote the Beginner's Guide to Creating a Custom USB SSDT the idea was to demystify and simplify the process of configuring all those USB ports our PC motherboards come with, so that they worked properly under macOS. The main sticking-point for many builders was the...

www.tonymacx86.com

 

[tango125]

xhciPortLimit is broken in Big Sur and Monterey (keep in mind this thread is in Catalina section post in Monterey if you are using that....)

make sure to do this in Catalina:

The New Beginner's Guide to USB Port Configuration

Pre-amble When I originally wrote the Beginner's Guide to Creating a Custom USB SSDT the idea was to demystify and simplify the process of configuring all those USB ports our PC motherboards come with, so that they worked properly under macOS. The main sticking-point for many builders was the...

www.tonymacx86.com

In between, I tried upgrading the open core, and everything was working fine, even through Big Sur, the USB was still working. Right now, it's not so much not working, just not fully.

I remember doing this USB thing. Was just looking for a easy way out. I had done that before I switched to opencore. Out of interest, with the original package, there was two aml files with USB, which one should I replace?

 

[Feartech]

In between, I tried upgrading the open core, and everything was working fine, even through Big Sur, the USB was still working. Right now, it's not so much not working, just not fully.

I remember doing this USB thing. Was just looking for a easy way out. I had done that before I switched to opencore. Out of interest, with the original package, there was two aml files with USB, which one should I replace?

just follow the guide, no shortcuts/easy way out....

 

[tango125]

Thank you for pointing me to the right direction. It's actually easier than I remember. Sorted.

 

[dsb]

USB 2's and 3's working fine here/recognized in hackintool.

Only got one problem with this build, after going to sleep the mouse lags, other than that system seems stable for the last couple of months. Tried loads of different kexts and bios options but no solution found. If any of you guys have any tips would be great.

 

[Arkadiy]

Good news! I just updated from Big Sur to Monterey using this EFI (updated to OpenCore 0.7.5 with latest kexts). Apparently everything is going well. Ethernet is working too.

Hi. I don't have much experience.

But everything worked out. BT adapter not working. I think it has something to do with the USB on the motherboard. But it doesn't matter yet.

Until I figured out how to transfer the bootloader to a disk in a computer, I start from a USB flash drive.

Thanks a lot.

 

[Arkadiy]

Hi

I was unable to set up the USB.
Available HS01-HS08 and SS01-SS08. The motherboard has an internal USB HS11/HS12.

All my attempts to activate these ports have failed. In the end, I realized that the problem is in the SSDT-USB-Z390-UD.aml file (IMHO). These ports are missing.

I have not yet figured out how to properly create this file. All tried methods do not work. You need to disable the current SSDT-USB-Z390-UD.aml, but then the mouse and keyboard stop working.

I ordered a cable to solve this problem in a workaround. The cable takes the USB from the back of the system unit and puts it inside. Inside I will be able to connect my BT adapter to this cable

9 Pin Male To External USB A Male PC Mainboard

Does anyone have any idea how to get the correct ssdt-usb aml file?

 

[Arkadiy]

USB 2's and 3's working fine here/recognized in hackintool.

Only got one problem with this build, after going to sleep the mouse lags, other than that system seems stable for the last couple of months. Tried loads of different kexts and bios options but no solution found. If any of you guys have any tips would be great.

I have seen reports that mouse lag is related to this setting is BIOS.

Boot> Operating System>Windows 8/10