- Joined
- Dec 15, 2010
- Messages
- 673
- Motherboard
- Asus ProArt Z690 Creator WiF
- CPU
- i9-12900K
- Graphics
- RX 6900 XT
- Mac
Exactly. Feel like I'm going crazy! LOLBut there is no "Cancel" button.
Exactly. Feel like I'm going crazy! LOLBut there is no "Cancel" button.
Let's abandon the A1/A2 experiment...Exactly. Feel like I'm going crazy! LOL
It was a little jokeBut there is no "Cancel" button.
@Elias64Fr,In almost all cases, the TB monitor almost never shows anything, or even lights up. I don't know if what I did works on the old BIOS, but the most consistent way for me to cause it to happen was to enter BIOS setup with a standard monitor (I'm using an LG 27UK650 over HDMI) then plugging the Thunderbolt cable into the LG UltraFine 5K (already plugged into AC power), waiting for video loss, then holding down the case power button and quickly pressing it to power back on.
The video import sounds interesting, as I suspect the BIOS fails to initialize the monitor on it's own without dGPU. I've also been curious how it handles in an RX 6800 XT USB-C port, but I haven't been able to get one.
They show up under BANK 0/ChannelA-DIMM0, and BANK 2/ChannelB-DIMM0.Are the DIMMs in A1 and B1?
Because each DIMM exceeds 8GB, it may be necessary to configure the Memory section regardless of how many DIMMs there are.
Once my liquid cooler is replaced, I’ll continue the tests on my end.
Awesome! Finally it works...@CaseySJ @Elias64Fr
I FIXED MY USB ISSUES!!!!
I now have full TB3 with Antelope and all working USB2/3 and Networking!!!!!!
Very good thinking.I had to set ReleaseUSBOwnership in OCConfig to true!
But from iOS there is no timeout?The Antelope Remote Control Panel still disconnects from my main rig after 2 minutes. I am going to order more ram tonight to see if I can run more than 2x 8gb sticks.
I tried this earlier today with two 16GB DIMMs. Alas, it did not work.They show up under BANK 0/ChannelA-DIMM0, and BANK 2/ChannelB-DIMM0.
I'll try mapping the memory.
Correct, There is no Timeout on the iOS application. The other observation I had is this:Awesome! Finally it works...
Very good thinking.
But from iOS there is no timeout?
Yes, there is 2 interesting graphic drivers : CoreEG2 and CoffelakeGraphics DXE drivers.@Elias64Fr,
Have you noticed any Apple video drivers (PEI or DXE) that we could import into the Z390 Designare BIOS? If so, maybe they could provide better support for Thunderbolt monitors during early stages of boot?