Contribute
Register

Success: Coffee Lake i7-8700K - GA-Z370N-WIFI

Status
Not open for further replies.
No need to use original or oversized card. Other brands works well too. I can suggest this one, perfectly fit inside the enclosure and works like charm.
BCM94352Z Fru 04X6020 AC BT4.0 867Mbps For lenovo

Thanks for your quick reply. I read an artical somewhere along the way that this card (BCM94352Z) has a lower bit rate compared to the BCM94360CS2. Thank's the link, if i don't find a good BCM94360CS2+ adapter, i will try your link. Do you order from this seller?


Apple MacBook Air 13" A1466 2013 2014 2015 2017 WiFi Airport Bluetooth Card
( 253268775818 )

BCM94360CS2 Card To NGFF(M.2) Key A/E Adapter For Mac OS and Hackintosh
( 282630740950 )

Thanks. I found the second adapter, but i don't find the first Card, because it's out of stock.
 
Hi, updated Extensions folder and EFI, minor changes and update any kext
Remember generate serial number and UUID
 

Attachments

  • EFI.zip
    22 MB · Views: 150
  • Extensions.zip
    1.4 MB · Views: 106
Hi, updated Extensions folder and EFI, minor changes and update any kext
Remember generate serial number and UUID


Thanks, it did not work for me until I enabled -disablegfxfirmware in clover config.

P.S.: Did any of you, guys, experienced with
acpi exception ae_not_found ...
issue on this board? I can boot and OS is working fine, but, it takes too long time to boot.
 
Hi, I know this ACPI problem.
I do not know how to fix it and yes, boot is slow.
I do not know how to do more ...:thumbdown
 
Hi guys

I can't enable UHD 630 whatever I try :crazy:. I can see the IGPU in system info but no video signal, black screen.

I have MSI B360 a pro and i5 8400. Please help with new ideas.

I attached my files.
 

Attachments

  • Alexandru’s iMac.ioreg
    18.1 MB · Views: 146
  • Screen Shot 2018-07-03 at 01.52.42.png
    Screen Shot 2018-07-03 at 01.52.42.png
    131.5 KB · Views: 149
  • EFI.zip
    22.3 MB · Views: 131
I have video signal without injecting IGPU in Clover but with artefacts...
 

Attachments

  • Screen Shot 2018-07-03 at 20.37.21.png
    Screen Shot 2018-07-03 at 20.37.21.png
    270.3 KB · Views: 155
You are using the wrong ig-platform-id. Since u have an rx560, you must use 0x59120003.
 
I have the same motherboard and Hackintosh boots only with F1 BIOS. It does not boot with F2 and newly released F3 BIOS.

F3 BIOS is good for Windows as it correctly enables GPU GOP driver @ 4K when CSM is disabled and Windows 8/10 is set to WHQL mode with Boot Logo enabled. I have tried AptIOFix v2 and v3 but it just hangs at boot logo

I have the same board, upgrade to BIOS F4, you have to reconfigure BIOS settings after upgrading, works without any issue !!
 
I fixed it. Forgot to plug in the antenna... :banghead:
 
Last edited:
Status
Not open for further replies.
Back
Top