- Joined
- Sep 4, 2012
- Messages
- 88
- Motherboard
- Z97-Gaming3
- CPU
- i7-4790
- Graphics
- MSI GTX 970 4G
- Mac
- Classic Mac
- Mobile Phone
Installed the nvidia web driver, and have since lost all video output if I plug the HDMI cable to the gtx960.
Installed the nvidia web driver, and have since lost all video output if I plug the HDMI cable to the gtx960.
Flags before boot:
View attachment 131420View attachment 131421
Last screen before i lose output :
View attachment 131424
Sorry for for the blur. I had to screen grab the video - it happens too fast.
Anyway to do it without pulling out the card again?
Thanks Jithin. I'm going to owe you lots of beer soon haha.
Next issue: after I changed the system definition to MP3,1 (I understand that's the best for most compatibility for a dedicated Graphics card and I have the 960.) I rebooted and kept getting a crossed circle- and I couldn't go any further. Any fixes for that?
also, I'll ask here. I'm going to be using my GTX960. Clover by default assigns me iMac14,2 for my onboard graphics install. I can go to MP3,1 or 5,1 for the graphics card (6,1 gives me issues - no video output.)
Would you recommend one over the other, considering that I'll be using Handoff which isn't "compatible" with MacPros older than 2009, so I feel I should use MP5,1. But then I have to delete the AGPM kept which I feel will affect the GTX960 in which case 3,1 is better. Or should I stick to iMac 14,2?
thank you guys for all your help!
Edit: it seems the crossed-circle was caused by the "updated" nvidia drivers 343.02.02f02. Still no luck. Going to reinstall the third time now. Ugh.
That's the -f -v result.
View attachment 131464
Remove OsxAptioFixDrv-64 from the /EFI/CLOVER/drivers64UEFI/ then try to boot.