Stuck at apple logo :( [installing snow leopard]

[totenkopf4]

I have already installed snow leopard, Mac OS X 10.6.8 Combo Update, and Multibeast.
and now I am stuck again in the apple logo (after clicking restart)

japsei

Okay progress... one issue is that using the MultiBeast can introduce issues w this process.

On systems not native to Snow Leo - Ivy Bridge and Haswell Hardware, we do not suggest using MultiBeast - this would be the MultiBeast for Snow Leo I speak of.

What startup switches did you use when you started this project. As you should use this during all Boots from the CD until we instal Mavs.

I would suggest trying the boot switch now, as listed take a picture of the halt or screen and post it.

-v PCIRootUID=0 GraphicsEnabler=Yes IGPEnabler=Yes

What we are looking to accomplish is to get osx SL to connect to the APple app store download Mavs
make USB and install from their.

We only want CPU motherboard and disk for this.. nothing else - use onboard video.

See if that helps.

Also check BIOS to make sure that you disable VT-d also in the BIOS.
Set video to IGMP and memory to 64 or 32 MB ram.

 

[japsei]

japsei

Okay progress... one issue is that using the MultiBeast can introduce issues w this process.

On systems not native to Snow Leo - Ivy Bridge and Haswell Hardware, we do not suggest using MultiBeast - this would be the MultiBeast for Snow Leo I speak of.

What startup switches did you use when you started this project. As you should use this during all Boots from the CD until we instal Mavs.

I would suggest trying the boot switch now, as listed take a picture of the halt or screen and post it.

-v PCIRootUID=0 GraphicsEnabler=Yes IGPEnabler=Yes

What we are looking to accomplish is to get osx SL to connect to the APple app store download Mavs
make USB and install from their.

We only want CPU motherboard and disk for this.. nothing else - use onboard video.

See if that helps.

Also check BIOS to make sure that you disable VT-d also in the BIOS.
Set video to IGMP and memory to 64 or 32 MB ram.

here's the halt screen. I can't get pass that

-v PCIRootUID=0 GraphicsEnabler=Yes IGPEnabler=Yes I also used this

 

[totenkopf4]

View attachment 72442

here's the halt screen. I can't get pass that

-v PCIRootUID=0 GraphicsEnabler=Yes IGPEnabler=Yes I also used this

japsei

can you try to use this added switch please

-x -v PCIRootUID=0 GraphicsEnabler=Yes

we will leave off the IGMP Enable section

No do not be alarmed if the USB ports do not work - mouse and keyboard should.

If we are lucky we should have a network - the wired connection.

As see if you get to the network,

 

[japsei]

japsei

can you try to use this added switch please

-x -v PCIRootUID=0 GraphicsEnabler=Yes

we will leave off the IGMP Enable section

No do not be alarmed if the USB ports do not work - mouse and keyboard should.

If we are lucky we should have a network - the wired connection.

As see if you get to the network,

new halt screen T.T

-x -v PCIRootUID=0 GraphicsEnabler=Yes <- I used this

 

[totenkopf4]

View attachment 72448

new halt screen T.T

-x -v PCIRootUID=0 GraphicsEnabler=Yes <- I used this

japsei

what is plugged into the usb ports - on the rear of the I.O shield next to the PS2 connector if u have one - I would like to only have the mouse and the keyboard.
Test again please - thanks for pics btw.

Also no other cards installed into any PCIe slots as well...

 

[japsei]

japsei

what is plugged into the usb ports - on the rear of the I.O shield next to the PS2 connector if u have one - I would like to only have the mouse and the keyboard.
Test again please - thanks for pics btw.

Also no other cards installed into any PCIe slots as well...

same halt screen.
only the keyboard and mouse are plugged.

thankyou! I really appreciate your help!

 

[japsei]

Hmmm. Do you want me to re-install the snow leopard OS and not install the Multibeast anymore?(All of my start ups are fine until I installed Multibeast) Hahaha its okay for meeee.

 

[totenkopf4]

same halt screen.
only the keyboard and mouse are plugged.

thankyou! I really appreciate your help!

japsei
Want u to take a pic of the bios screen for setting the video

set it to IGMP set video ram to 64 and post

Also see if you can find in the bios the section where VT-d is disabled tak pic and post please.

 

[japsei]

japsei
Want u to take a pic of the bios screen for setting the video

set it to IGMP set video ram to 64 and post

Also see if you can find in the bios the section where VT-d is disabled tak pic and post please.

Here it is sir

 

[totenkopf4]

View attachment 72454View attachment 72455

Here it is sir

japsei

please set the Init Display First w a field setting of PCIe 1.. to AUTO.

in screen two change Intel Virtualization Technology to disable.

then lets try w booting from IBoot for haswell w the switches again


One other thing watch this video and compare its bios settings to yours...
http://www.tonymacx86.com/340-snow-leopard-mountain-lion-ivy-bridge-installation-video-guide.html

Some of the terms maybe different but its a Gigabyte motherboard Z77 so its should be similar.