Hey everyone, I've tried a bunch of different patches, but could not even get acceleration working with the HD 530 on my PC. I used the Multibeast patch, this one, and tried a few other ones as well, but with no results. The 530 actually shows up under the Graphics section of System Information with the full acceleration, but under "About this Mac" it says that "Display 7 mb" is being used. How do I get it to use the right one?
DVMT-prealloc set to 64mb?
My bios default settings had this setting at 32mb, and I had tried cranking it up to 128 and 256, but it still failed. When I set it to 64mb, everything just started working.
I'm not going to dive into your DSDT but I took a quick look at your config, and I see you have a lot of duplicate patches in there, the 4 port patch seems to be included at least 3 times, I lost count. I would try to clean up your config a bit, at the very least, disable some of the duplicates. What problem are you having?
Thanks. We found the solution. Problem is, two GPU doesn't work at the same time. When I disabled my GTX660 with nv_disable=1 glitch is gone.
is your both GPU's working at the same time without any problem? Cause I dont see any boot arguments in your files.
Special Thanks to @schwadorf.
I have tried many times and finally this method work.In my setup I used ig-platform-id 0x19120000 and Inject Intel true, however you might try different values. The most important config part is below.
Add to clover config:
Code:<key>Devices</key> <dict> <key>AddProperties</key> <array> <dict> <key>Device</key> <string>IntelGFX</string> <key>Key</key> <string>AAPL,GfxYTile</string> <key>Value</key> <data> AQAAAA== </data> </dict> </array> </dict>
View attachment 218567
Thanks to PikerAlpha for discovering AAPL,GfxYTile
Hi Telepati, I have almost the same desktop setup as you but without GPU in my build. I tried all kinds of fix/patch like you said but still no luck; the moment I edit config.plist by adding those settings under "Device" and "graphics" section makes the drive unbootable.
Given that I have no GPU, should I or should I not be using "Inject Intel" under graphic section?
Also, can you please share your Config.plist? I want to give yours a go by putting into my EFI partition.
The differences between my config and yours areHi aol! Good observation... I clean up this duplicated patches (like u could see in the attach) in the config... I change what Gigamaxx indicate (fake ID for 0x19120003, use 0a206080 for ig and put intel= false and true). My DVMT minimal memory is 64mb already (and max allowed supported).... I tried so many options... not work for the glitches yet since Sierra was created in setember.
If you could help i'd be very thankful. Thank you anyway for your attention.
Yes I have discrete GPU but I don't use it. I just using HD530 with full patched.
First check you BIOS settings. is your IGPU selected primary first and is your DVMT 64MB? If you are using this ig-platform-id 0x19120000 yes 'Inject Intel' must be checked.
You can try also @Gigamaxx fake id method without 'Intel inject'
Fake ID 0x19120003, ig-platform-id 0a206080 'Inject Intel' must be unchecked.
I attached my config;