But now i use my Intel HD 530 but i got flickering in the left hand corner how can i solve that?
I get KP everytime I apply the ig-platform-id. SMBIOS is 17,1. I can't make this work.
No. I'm not sure where to find that option.DVMT-prealloc set to 64mb?
Far as I know you don't need to change DVMT past 64MB. Looking at your config nothing really stands out as wrong to me. How did you generate that config - did you use a forum post for your board, or install Clover from scratch, or use MultiBeast? You have a different CsrActiveConfig than I do but I don't really know what that does; I used a forum post specific to my board to pull a config from. I do believe that until you see the graphics memory at 1536MB your graphics are not set up properly. Sorry I can't help more.Hi,
b) "About this Mac" graphics continue to show only 5mb
I have read through the glitch fix thread, and I don't know if it applies? I seem to already have the right settings (ig-platform-id 0x19120000 etc.)
Thanks a lot for your response man. It did send me down another path (which is good). I managed to solve the issue. Totally Noob mistake. Forgot I still had my bootable USB attached, so Clover wasn't injecting the right ig-platform-id. Perfect graphics now, with 1536mb VRAMFar as I know you don't need to change DVMT past 64MB. Looking at your config nothing really stands out as wrong to me. How did you generate that config - did you use a forum post for your board, or install Clover from scratch, or use MultiBeast? You have a different CsrActiveConfig than I do but I don't really know what that does; I used a forum post specific to my board to pull a config from. I do believe that until you see the graphics memory at 1536MB your graphics are not set up properly. Sorry I can't help more.