Sebinouse's Build : CustoMacMini 2014 - Intel NUC Haswell i5-4250U - El Capitan

[Swampcat]

Thank! Solved the problem.
Prepping the USB from a Hackintosh NUC with Yosemite failed.
Prepping and patching it from a MacBook Air and it goes fine.
So on the go again.

 

[Sebinouse]

10.11.6 update OK

 

[slothbag]

That was quick Thanks, installing now.

 

[Swampcat]

Just a small update.
Installing on a Haswell NUC 4250 WYKH succeeded.

Only this step gave a challenge:

Tried to find the package Clover in the first post..couldn't find it.

Edit: ...User error: just had to click the last line for the files....
2015 10 30 : Initial Release
2015 11 01 : New config.plist to allow Install
2016 02 12 : New solutions for ALC283, Ethernet, Wifi, BT, SSDTs
2016 05 02 : Instructions for ALC283, no more BCM94352 support​

My hackintosh is up and running now.

Thanks Sebinouse

For those in trouble, some of the apps I used:
Check the Big List of Solutions for El Capitan install problems.
Mount EFI partition
Kext injector

 

[Flotho]

i install the alc283_out on my d34010 but i get an system message "system extension cannot be used"
the normal alc283 works, but the sound is laggy over my headphones...
i have installed the new 10.11.6!
Could somebody help me?

 

[Flotho]

i install the alc283_out on my d34010 but i get an system message "system extension cannot be used"
the normal alc283 works, but the sound is laggy over my headphones...
i have installed the new 10.11.6!
Could somebody help me?

Problem solved!

 

[f1ne]

Updated to 10.11.6. Everything works good without additional steps.

 

[Swampcat]

• NUC D5240WYKH1, bios version 4.1, 8Gb Memory, no wifi/BT card
• osX 10.11.6 on mSata drive with Clover (Main boot)
• Windows 10 on Sata drive
• Clover Dual/Multi boot
• Dual Monitor

_____________________________________________________________________
Well final update:

Thanks, Danke, Gracias, Bedankt, Merci, Grazie, 谢谢 Sebinouse

Everything now running smooth in Dual Boot Mode.
Did the Hackintosch install a few times to get the hang of it....
Lessons learned:

• Follow Sebinouse manual -exactly- to the letter..
• Backup, backup, backup the EFI folder before every change...so you can reverse the changes easily

Most major change was the screen settings.
This solution might also help those who got problems with screen flickering...
Cause was conflicting 'refresh' rates combined with certain monitors....

Modifications:

• Used manual to prepare USB and install Capitan 10.11.6
  (yes, Sebinouse manual verified and tested for 10.11.6)
• Added Windows on a second hard drive and now happily dual booting.
  Clover is just a little gem if you learn how to 'cut' it. My Config.plist enclosed for those curious
• Added 2nd monitor and it works 'out-of-the-box'
  (enable dual monitor also in the BIOS!)

Dual Boot:
1. Installed Hackintosh (mSATA) according to Sebinouse instructions.
2. Removed mSATA drive
3. Installed SATA drive
4. Install & Configure Windows
5. Installed mSATA drive
6. Edit BIOS to boot on Clover/EFI first
7. Start on OSx and use Clover configurator

a: to cleanup the boot options: Gui --> Scan = disable Legacy
b: boot last used: Boot --> Default Boot Volume = LastBootedVolume​

Essentially dual/multi booting simplified:

• Install every OS on a separate Hard Drive
• While installing only have one Drive installed (do not attach the other drives!)
• When finished attached all Hard Drives and first/immediately modify BIOS to boot on CLOVER (EFI) first!!!!
• Optional: Cleanup boot options with Clover Configurator

Known issues:
Multi boot freeze at startup:
Clover/OSx startup can have issues with normal boot when Windows has been put in sleep/hibernate.
Starting Clover in Verbose mode solves the problem, it mentions it found a drive in 'sleep/hibernate' status...and continues OSx boot. (Weird but it works).
I just disabled sleep/hibernate in Windows to get rid of this.

Screen flickering:
When logon or watching clips/movies in full screen I had (sometimes) horizontal stripes or blocks.
Modified settings according to RehabMan instructions (for desktop!), files (should be) included with Sebinouse package.
Either change monitor as others suggested -or- change the settings in config.plist
I proceeded to change my config.plist

use Clover configurator:

Devices --> Fake ID --> IntelGFX = 0x4128086
Graphics --> ig-plaform-id = 0x0d220003
​

Source for Graphics Card driver:
http://www.tonymacx86.com/threads/i...ll-support-for-alternate-cpus-in-os-x.155051/
https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads​

Other sources used (for the NUC):

El Capitan Troubleshooting Guide
Clover boot loader
Clover configurator
Audio: 4 different audio install methods/approaches
p.s. frustrated with audio...just plug in some USB connected speakers/microphone to get around it...​

 

[f1ne]

Can I get working Bluetooth with BCM94360HMB in the Nuc? Without USB connector?

 

[Spartach]

Can I get working Bluetooth with BCM94360HMB in the Nuc? Without USB connector?

BCM94360HMB works fine.
Use BrcmFirmwareData.kext and BrcmPatchRAM2.kext in Clover.
https://bitbucket.org/RehabMan/os-x-brcmpatchram/downloads