Sebinouse's Build : CustoMacMini 2014 - Intel NUC Haswell i5-4250U - El Capitan

[Sebinouse]

Always get latest file ... every improvement is in the next update ...

 

[Sabanet]

Thank's Mr. Sebinouse, I have installed mac osx on my brand new Intel NUC. And it's been really easy thanks to your job!!!

 

[slothbag]

Firstly, thanks Sebinouse for these instructions. Was able to get my nuc up and running in no time.

I've noticed lately my screen occasionally blacks out for a few seconds, usually with a flicker or two preceding it. Maybe only happens once every few hours and is not a big problem. Is this a known issue? Are there any fixes?

I tried using the HDMI and DisplayPort, made no difference.

I'm running OSX 10.11.5, Nuc i5-4520.

Hmm, I just had a thought my monitor could be dying.

 

[Sabanet]

Hi everyone!!I have made my first hackintosh a few days ago. Now I have connected my new 4k @ 60 hz, but I can only use 3840x2160 with low resolution @ 30 hz. I am using a Displayport 1.2 cable and my hack is an intel NUC with intel i5-4250U processor. If I am right the intel HD 5000 can manage monitor until 4k @ 60hz...

Thank's to all for the help and I would like to thanks again Sebinouse for his fantastic work!!

 

[slothbag]

I switched my monitor and the flickering seems to have stopped. Nuc hackintosh working well.

 

[Shad0wWalk3r]

Hi everyone!!I have made my first hackintosh a few days ago. Now I have connected my new 4k @ 60 hz, but I can only use 3840x2160 with low resolution @ 30 hz. I am using a Displayport 1.2 cable and my hack is an intel NUC with intel i5-4250U processor. If I am right the intel HD 5000 can manage monitor until 4k @ 60hz...

Thank's to all for the help and I would like to thanks again Sebinouse for his fantastic work!!

how much RAM are you using?

 

[Sabanet]

how much RAM are you using?

16 gb (8gbx2) gskill 1600mhz at 1.35v.

I've tried this solution https://github.com/Floris497/mac-pixel-clock-patch-V2 seems to work but when I try to scale the monitor resolutione I've had green and black stripes and I've had to reinstall the OS...

 

[Swampcat]

Haswell NUC D54250WYKH | Problem prepping USB stick

Base system OS: Yosemite (Hackintosh)
Just when applying Hack_Report_Clov 2 the end of the patching fails.

updating: Rapport/EFI_kexts.txt (stored 0%)
2016-07-17 13:32:03.923 afplay[2339:124728] 13:32:03.923 ERROR: AQMEIO.cpp:400: _FindIOUnit: error -66680
2016-07-17 13:32:03.923 afplay[2339:124728] 13:32:03.923 ERROR: >aq> AudioQueueObject.cpp:1597: Prime: failed (-66680); will stop (72000/0 frames)
Error: AudioQueueStart failed (-66680)
button returnedK
logout
[Process completed]

Any problems to proceed with this error or is there a manually patch solution?

 

[Sebinouse]

Haswell NUC D54250WYKH | Problem prepping USB stick

Base system OS: Yosemite (Hackintosh)
Just when applying Hack_Report_Clov 2 the end of the patching fails.

updating: Rapport/EFI_kexts.txt (stored 0%)
2016-07-17 13:32:03.923 afplay[2339:124728] 13:32:03.923 ERROR: AQMEIO.cpp:400: _FindIOUnit: error -66680
2016-07-17 13:32:03.923 afplay[2339:124728] 13:32:03.923 ERROR: >aq> AudioQueueObject.cpp:1597: Prime: failed (-66680); will stop (72000/0 frames)
Error: AudioQueueStart failed (-66680)
button returnedK
logout
[Process completed]

Any problems to proceed with this error or is there a manually patch solution?

Thanks for the report : make sure the right EFI partition in mounted before running the script.

The files in your EFI folder has not been copied properly (no SSDT, config.plist is wrong ...). If you want to run Yosemite you will have to move the kexts from Volumes/EFI/EFI/CLOVER/kexts/10.11/ to Volumes/EFI/EFI/CLOVER/kexts/10.10.

 

[Sebinouse]

16 gb (8gbx2) gskill 1600mhz at 1.35v.

I've tried this solution https://github.com/Floris497/mac-pixel-clock-patch-V2 seems to work but when I try to scale the monitor resolutione I've had green and black stripes and I've had to reinstall the OS...

Seems OK on my 1080p screen ... I can't try other resolution though