- Joined
- Jan 15, 2013
- Messages
- 61
- Motherboard
- Gigabyte GA-Z77X-UD3H Rev. 1.1
- CPU
- i5-3225
- Graphics
- HD 4000
- Classic Mac
- Mobile Phone
Hi There
I am running 10.12.3 with a small monitor on mainboards DVI via HD4000 - but would like to run a 27" monitor with 2560x1440 (WQHD) on a Sapphire HD5750 graphic card (I remember I once made a firmware update, so it should be identical to HD5770).
"About this Mac" shows Intel HD graphics 4000 with 1536 MB.
System report lists (somehow, see below) both graphic cards, but only the HD4000 connected to a monitor; the other is listed as ATI Radeon HD 5450, manufacturer: ATI (0x1002), and ID: 0x68be (I have the same Dipsplayport connection as when starting my working Win7 from another starting disk, so the DP-cable should work).
Is there anything I should/could change to get both monitors working, or the HD5750 recognised with the monitor?
BTW, I use Clover 3766, legacy, Multibeast 7.0.1
I am running 10.12.3 with a small monitor on mainboards DVI via HD4000 - but would like to run a 27" monitor with 2560x1440 (WQHD) on a Sapphire HD5750 graphic card (I remember I once made a firmware update, so it should be identical to HD5770).
"About this Mac" shows Intel HD graphics 4000 with 1536 MB.
System report lists (somehow, see below) both graphic cards, but only the HD4000 connected to a monitor; the other is listed as ATI Radeon HD 5450, manufacturer: ATI (0x1002), and ID: 0x68be (I have the same Dipsplayport connection as when starting my working Win7 from another starting disk, so the DP-cable should work).
Is there anything I should/could change to get both monitors working, or the HD5750 recognised with the monitor?
BTW, I use Clover 3766, legacy, Multibeast 7.0.1