- Joined
- Jul 7, 2019
- Messages
- 194
- Motherboard
- Eglobal S200
- CPU
- i7-8750H
- Graphics
- UHD 630
- Mac
- Classic Mac
- Mobile Phone
yes It doesn't seem to help with this system
Have you read the section 'High DPI Displays & Dual Monitors' to unify vram?
yes It doesn't seem to help with this system
I get the default framebuffer (no acceleration) with that config
I was getting the same distorted graphics has you until I used UEFI with CSM instead of just UEFI Bios. might helpSome more progress...
I added VoodooTSCSync.kext and that allows me to boot without cpus=1 and everything works better.
About the graphics, I realized that if I boot clover with a lower resolution (i.e. 1024x768) all the ig-platform-ids that gave me distorted graphics will then work with acceleration and everything. So, after some experimentation I managed to get to a configuration that works fine with the recommended ig-platform-id (0x0a260006), but as soon as I try to set clover to the native resolution I get distorted graphics again. It's a bit annoying but it works
After finding that workaround I got pretty much everything working perfectly, except for multitouch in the touchpad. The touchpad works flawlessly on linux and it's listed as a "Razer Blade" usb device and uses the hid-rmi driver, libinput says it's Synaptics. I've been playing around with VoodooI2C/HID and I couldn't manage to get it to work.
Maybe this needs some coding? I saw that at some point there was a SynapticsRMI implementation but I tried to find it in the latest version and I couldn't. I think I could try to patch this with some guidance, and taking a look at the linux driver.
Some more progress...
I added VoodooTSCSync.kext and that allows me to boot without cpus=1 and everything works better.
About the graphics, I realized that if I boot clover with a lower resolution (i.e. 1024x768) all the ig-platform-ids that gave me distorted graphics will then work with acceleration and everything. So, after some experimentation I managed to get to a configuration that works fine with the recommended ig-platform-id (0x0a260006), but as soon as I try to set clover to the native resolution I get distorted graphics again. It's a bit annoying but it works
After finding that workaround I got pretty much everything working perfectly, except for multitouch in the touchpad. The touchpad works flawlessly on linux and it's listed as a "Razer Blade" usb device and uses the hid-rmi driver, libinput says it's Synaptics. I've been playing around with VoodooI2C/HID and I couldn't manage to get it to work.
Maybe this needs some coding? I saw that at some point there was a SynapticsRMI implementation but I tried to find it in the latest version and I couldn't. I think I could try to patch this with some guidance, and taking a look at the linux driver.