Radeon RX 4XX/5XX standalone system, AMDRadeonX4250.kext (GVA support H264) does not support HEVC HW

[familygw]

Here's a screenshoot of VideoProc on my system. It shows support for both HEVC and H.264. I am not using WhatEverGreen and don't have the iGPU enabled.

Hi, how do you did it the FB injection for RX 580?

 

[shuhung]

I tried to inject the FBName but without success. How do you did it?

Inject ATI + FB Name "Orinoco" for RX570, HDMI work DP not work after injection.

 

[CyCLoBoT]

Inject ATI + FB Name "Orinoco" for RX570, HDMI work DP not work after injection.

View attachment 405758

DP is working on my system.

 

[nagelelu]

Inject FBName will show graphics card name on VideoProc

which fb name I should choose for sapphire rx470 4g d5 oc, with 2 dp, 2 hdmi and 1dvi, and I use the dp port.

 

[blob810]

which fb name I should choose for sapphire rx470 4g d5 oc, with 2 dp, 2 hdmi and 1dvi, and I use the dp port.

You can find the Framebuffer names in the ATI Guide:

AMD9500Controller.kext (4th Gen GCN architecture)

Graphics Card	OOB	min. OSX	DevID	Reference Port Layout	Framebuffer	Known Issues
RX 460 / RX 560	Yes	10.12	0x67EF	DP, HDMI, DVI	Acre	Needs RadeonDeInit
RX 470 / RX 570	Yes	10.12.6	0x67DF	2x DP, HDMI, 2x DVI	Orinoco	Needs RadeonDeInit
RX 480 / RX 580	Yes	10.12.6	0x67DF	2x DP, HDMI, 2x DVI	Orinoco	Needs RadeonDeInit

So for the RX470 its also Orinoco.

 

[firedragon852]

First issue will definitely get fixed. For the second issue, do you get any error messages? If you go with the iMacPro1,1 route, WhatEverGreen is not needed and also shikigva=1 flag.

You can just back up your current CLOVER folder and try the new SMBIOS. If anything stops working, you cna always revert back to the original CLOVER folder.

Updating to 10.14.5 fixed both issues. Thanks!

 

[nagelelu]

So for the RX470 its also Orinoco

thanks

 

[familygw]

I've used Guariba because it fits better with my card (RX580 GAMING 8GB) (3 DP, 1 HDMI, 1 DVI). Seems that Orinoco have the 6th port physical whereas Guariba have 6 ports but one seems 000000.

ATOM BIOS Rom:
    SubsystemVendorID: 0x1458 SubsystemID: 0x22fc
    IOBaseAddress: 0x0000
    Filename: RX580G8.F82
    BIOS Bootup Message:
GV-RX580GAMING-8GD/F82/064C                                              

PCI ID: 1002:67df
Connector at index 0
    Type [@offset 40766]: DisplayPort (10)
    Encoder [@offset 40770]: INTERNAL_UNIPHY2 (0x21)
    i2cid [@offset 40876]: 0x90, OSX senseid: 0x1
    HotPlugID: 6
Connector at index 1
    Type [@offset 40776]: DisplayPort (10)
    Encoder [@offset 40780]: INTERNAL_UNIPHY2 (0x21)
    i2cid [@offset 40903]: 0x92, OSX senseid: 0x3
    HotPlugID: 4
Connector at index 2
    Type [@offset 40786]: DisplayPort (10)
    Encoder [@offset 40790]: INTERNAL_UNIPHY1 (0x20)
    i2cid [@offset 40930]: 0x91, OSX senseid: 0x2
    HotPlugID: 1
Connector at index 3
    Type [@offset 40796]: HDMI-A (11)
    Encoder [@offset 40800]: INTERNAL_UNIPHY1 (0x20)
    i2cid [@offset 40957]: 0x93, OSX senseid: 0x4
    HotPlugID: 5
Connector at index 4
    Type [@offset 40806]: DVI-D (3)
    Encoder [@offset 40810]: INTERNAL_UNIPHY (0x1e)
    i2cid [@offset 40984]: 0x95, OSX senseid: 0x6
    HotPlugID: 3

RX580G8.F82 :

GV-RX580GAMING-8GD/F82/064C                                              

Subsystem Vendor ID: 1458
       Subsystem ID: 22fc
Object Header Structure Size: 350
Connector Object Table Offset: 48
Router Object Table Offset: 0
Encoder Object Table Offset: fb
Display Path Table Offset: 12
Connector Object Id [19] which is [DISPLAY_PORT]
    encoder obj id [0x21] which is [INTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false
Connector Object Id [19] which is [DISPLAY_PORT]
    encoder obj id [0x21] which is [INTERNAL_UNIPHY2 (osx txmit 0x22 [duallink 0x2] enc 0x5)] linkb: true
Connector Object Id [19] which is [DISPLAY_PORT]
    encoder obj id [0x20] which is [INTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false
Connector Object Id [12] which is [HDMI_TYPE_A]
    encoder obj id [0x20] which is [INTERNAL_UNIPHY1 (osx txmit 0x21 [duallink 0x1] enc 0x3)] linkb: true
Connector Object Id [4] which is [DVI_D]
    encoder obj id [0x1e] which is [INTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false

Guariba (6) @ 0x70cd8
, , , , ,
000000000000000000040000040300000001010100000000 <--- seems not in use
120406010000000000040000040300000001020100000000
220504030000000000040000040300000001030100000000
110201020000000000080000040200000001040000000000
210305040000000004000000040200000001050000000000
000003060000000000040000000100000001060100000000

Orinoco (6) @ 0x70458
, , , , ,
38c905000000000000040000040300000001010100000000 <--- seems used
120406010000000000040000040300000001020100000000
220504030000000000080000040200000001030000000000
110201020000000000080000040200000001040000000000
210305040000000004000000040000000001050000000000
000003060000000000040000000100000001460100000000

Also, I must use the option 'Fake ID'.

 

[Neo-matrix]

Hi there,

The update to 10.14.5 went smoothly but noticed that hevc playback is gone as well as Netflix in Safari no longer works. Both of these worked perfectly with previous versions. I don't know what has changed with this version. I have the latest WEG in others folder.
Thanks

 

[shuhung]

The update to 10.14.5 went smoothly but noticed that hevc playback is gone as well as Netflix in Safari no longer works.

HEVC work fine and Netflix on Safari work perfectly, use SMBIOS iMacPro1,1