- Joined
- Aug 10, 2014
- Messages
- 5
- Mac
- Classic Mac
- Mobile Phone
I have successfully installed 10.9.4 with Unibeast and am halfway there to get everything working as I want. Biggest thing I was hoping to accomplish was to get a box running with dual display support so I can run a program called ProPresenter in the sound room at my church. I have an Asus branded Radeon 8400GS (device ID is 10DE:06E4) that OSX recognized out of the box, but it will not let me use both the VGA and DVI ports. I need to get both ports working so I can have a monitor in sound room then the other to the projector in the auditorium. Can anyone give me some advice?
If it helps, here's my other specs (and yes I know this is not an ideal motherboard, I was just trying to salvage an old spare computer that was donated for free).
Its an HP P6-2636S. I used speccy to get what the specs are from the windows side and it says the Motherboard is a Foxconn "2AdA" (Sandy Bridge Reb09 - south bridge H61 rev B3 if it matters). Processor is a Pentium G645 @ 2.9ghz (OSX about this mac shows it as a core i3 @2.9ghz - is it a variant of an i3 processor or is OSX just detecting it wrong because its Hackintosh???). Ethernet is working fine, but audio won't work either (Speccy showed its a Realtek HD audio card).
Biggest thing I need to get to work is the dual displays. Any help or advice would be greatly appreciated. I also downloaded my DSDT and SSDT's from a linux live disk but not sure how to get them compiled right as I get errors in DSDT editor. (If I should work on DSDT another question... I extracted those files before I had thrown the Radeon card in a PCI slot...before I was trying to get on board graphics working and it was a no-go..... should I get fresh DSDT and SSDT files now?)
Thanks All.
If it helps, here's my other specs (and yes I know this is not an ideal motherboard, I was just trying to salvage an old spare computer that was donated for free).
Its an HP P6-2636S. I used speccy to get what the specs are from the windows side and it says the Motherboard is a Foxconn "2AdA" (Sandy Bridge Reb09 - south bridge H61 rev B3 if it matters). Processor is a Pentium G645 @ 2.9ghz (OSX about this mac shows it as a core i3 @2.9ghz - is it a variant of an i3 processor or is OSX just detecting it wrong because its Hackintosh???). Ethernet is working fine, but audio won't work either (Speccy showed its a Realtek HD audio card).
Biggest thing I need to get to work is the dual displays. Any help or advice would be greatly appreciated. I also downloaded my DSDT and SSDT's from a linux live disk but not sure how to get them compiled right as I get errors in DSDT editor. (If I should work on DSDT another question... I extracted those files before I had thrown the Radeon card in a PCI slot...before I was trying to get on board graphics working and it was a no-go..... should I get fresh DSDT and SSDT files now?)
Thanks All.