- Joined
- Nov 18, 2018
- Messages
- 53
- Motherboard
- Lenovo Legion 7i - 15IMH05
- CPU
- i7-10750H
- Graphics
- UHD 630 / RTX 2070
- Mobile Phone
Hello everybody...
This is the second time for me to install a Hackintosh on a laptop, here is the specifications :
Laptop : Lenovo legion 7i-15IMH
Processor : Intel Core i7-10750H
Memory : 16GB DDR4
iGPU : Intel UHD 630 for 10th Gen Comet Lake-H GT2
dGPU : Nvidia RTX 2070 Max-Q 8GB GDDR6 VRAM
Wi-Fi : Intel Wi-Fi 6 AX201
Ethernet : Realtek RTL8168 Gigabit Ethernet
Audio : Realtek ALC 287
Storage : 1x Samsung MZVLB1T0HBLR-000L2 NVME SSD 1TB
Keyboard : PS2 Keyboard
Touchpad : MSFT0001 I2C Touchpad
Thunderbolt : Available(Thunderbolt 3)
Keyboard backlight : Available (Corsair)
Display : Full HD (1920x1080p) 144Hz
Bootloader : OpenCore 0.8.8
Destination OS : macOS Big Sur
I have followed the installation guides from Dortania. However, I still encounter this issue when booting Opencore from my USB stick:
View attachment IMG_20230129_160256.jpg
At first, it was able to pass the "Watchdog Status is 0" then selecting Big Sur installation and go to the above stage showed, then restarts... But now it stuck on " Watchdog status is 0" showed below:
what I have done :
I attach my EFI Partition zipped below...any help would be appreciated.
N.B.
This is the second time for me to install a Hackintosh on a laptop, here is the specifications :
Laptop : Lenovo legion 7i-15IMH
Processor : Intel Core i7-10750H
Memory : 16GB DDR4
iGPU : Intel UHD 630 for 10th Gen Comet Lake-H GT2
dGPU : Nvidia RTX 2070 Max-Q 8GB GDDR6 VRAM
Wi-Fi : Intel Wi-Fi 6 AX201
Ethernet : Realtek RTL8168 Gigabit Ethernet
Audio : Realtek ALC 287
Storage : 1x Samsung MZVLB1T0HBLR-000L2 NVME SSD 1TB
Keyboard : PS2 Keyboard
Touchpad : MSFT0001 I2C Touchpad
Thunderbolt : Available(Thunderbolt 3)
Keyboard backlight : Available (Corsair)
Display : Full HD (1920x1080p) 144Hz
Bootloader : OpenCore 0.8.8
Destination OS : macOS Big Sur
I have followed the installation guides from Dortania. However, I still encounter this issue when booting Opencore from my USB stick:
View attachment IMG_20230129_160256.jpg
At first, it was able to pass the "Watchdog Status is 0" then selecting Big Sur installation and go to the above stage showed, then restarts... But now it stuck on " Watchdog status is 0" showed below:
what I have done :
- Change NVRAM WriteFlash to NO
- Delete NVRAM/ADD "4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102"
I attach my EFI Partition zipped below...any help would be appreciated.
N.B.
- I used the Debug version of OpenCore (for easy debugging) but the release version of kext as Dortania not "explicitly" told me to do so, correct me if I'm wrong.
- I am also currently using the prebuilt SSDT, which I'll be making them manually once I've done installing.