- Joined
- Aug 7, 2010
- Messages
- 32
- Motherboard
- Gigabyte GA-X58A-UD3R
- CPU
- i7 930
- Graphics
- HD7870
- Mac
- Mobile Phone
Re: Official CustoMac Pro X58A-UD3R-2.0 Install Guide for 10.6.4
Do the steps by MacMan still applies for 10.6.5?
I was using MultiBeast 2.6.3 and have followed the steps, cept for ATY_Init Vervet, which I picked Uakari, and the smbios.plist which I picked 4,1 Mac Pro Core i7 and had failed to boot.
I finally went with Easybeast and have successfully run 10.6.5 with audio and LAN working, but I still can't get the 5970 to work. Have added devid and disabled 2nd GPU but results in a failed boot.
Could anyone kindly advise the best path to reinstall the system now that MultiBeast 3.0.3 is out? I have a freshly installed 10.6.3 ready to tinker with.
Would truly appreciate it
Do the steps by MacMan still applies for 10.6.5?
I was using MultiBeast 2.6.3 and have followed the steps, cept for ATY_Init Vervet, which I picked Uakari, and the smbios.plist which I picked 4,1 Mac Pro Core i7 and had failed to boot.
I finally went with Easybeast and have successfully run 10.6.5 with audio and LAN working, but I still can't get the 5970 to work. Have added devid and disabled 2nd GPU but results in a failed boot.
Could anyone kindly advise the best path to reinstall the system now that MultiBeast 3.0.3 is out? I have a freshly installed 10.6.3 ready to tinker with.
Would truly appreciate it