Contribute
Register

Not booting after install

Status
Not open for further replies.
outsidefifty50

outsidefifty50

Joined
Jun 28, 2017
Messages
3
Testing an istall on my acer v5-573 Laptop. Think its a haswell.
Used clover legacy mode, looks like it installed fine, then after reboot and go into the drive to continue to boot it gets to the end of the load bar with spinning wheel then the screen goes all strange looking.

Anyway, i have done the -v and attached.. any idea? im new to this...
 

Attachments

  • Screen Shot 2017-07-03 at 1.07.10 pm.png
    Screen Shot 2017-07-03 at 1.07.10 pm.png
    2.2 MB · Views: 123
Does not require Buying Advice - Moved to Laptop Support.
 
outsidefifty50 said:
Testing an istall on my acer v5-573 Laptop. Think its a haswell.
Used clover legacy mode, looks like it installed fine, then after reboot and go into the drive to continue to boot it gets to the end of the load bar with spinning wheel then the screen goes all strange looking.

Anyway, i have done the -v and attached.. any idea? im new to this...
Click to expand...

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"
 
RehabMan said:
Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"
Click to expand...



well thats no help
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top