0:100 0:100 MemLog inited, TSC freq: 2659999915
0:100 0:000 LegacyRegion2: Chipset/proc: 0x34058086
0:100 0:000 Core i7 processors (PAM 0x40-0x47)
0:100 0:000 Test PAM1=(0x41=11, 0x5a=00, 0x81=0B, 0x91=33) at chipset 34058086
0:100 0:000 , Install = Success
0:116 0:016 BiosVideoDriverBindingStart!
0:116 0:000 BiosVideoCheckForVbe
0:116 0:000 EdidOverride not found
0:558 0:442 Edid1-
0:707 0:148 Edid0+
0:707 0:000 found Detail Timing 1280x1024
0:847 0:140 0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0
0:853 0:005 1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1
0:858 0:005 2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2
0:864 0:005 3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3
0:889 0:024 BV new mode: 3 1280x1024
1:521 0:632 SetMode pref 3 (3) = Success
5:644 4:122
5:644 0:000 Now is 30.11.2015, 1:11:15 (GMT+2047)
5:644 0:000 Starting Clover rev 3320 on CLOVER EFI
5:644 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1CCA8BEE-2C6A-4983-B0E5-18EB9A4F6B58,0x28,0x64000) @BDE19F18
5:644 0:000 SelfDirPath = \EFI\CLOVER
5:644 0:000 Total Memory Slots Count = 6
5:644 0:000 Type 17 Index = 0
5:644 0:000 SmbiosTable.Type17->Speed = 1066MHz
5:644 0:000 SmbiosTable.Type17->Size = 2048MB
5:644 0:000 SmbiosTable.Type17->Bank/Device = BANK0 DIMM0
5:644 0:000 Type 17 Index = 1
5:644 0:000 SmbiosTable.Type17->Speed = 1066MHz
5:644 0:000 SmbiosTable.Type17->Size = 2048MB
5:644 0:000 SmbiosTable.Type17->Bank/Device = BANK1 DIMM1
5:644 0:000 Type 17 Index = 2
5:644 0:000 SmbiosTable.Type17->Speed = 1066MHz
5:644 0:000 SmbiosTable.Type17->Size = 2048MB
5:644 0:000 SmbiosTable.Type17->Bank/Device = BANK2 DIMM2
5:644 0:000 Type 17 Index = 3
5:644 0:000 SmbiosTable.Type17->Speed = 1066MHz
5:644 0:000 SmbiosTable.Type17->Size = 2048MB
5:644 0:000 SmbiosTable.Type17->Bank/Device = BANK3 DIMM3
5:644 0:000 Type 17 Index = 4
5:644 0:000 SmbiosTable.Type17->Speed = 1066MHz
5:644 0:000 SmbiosTable.Type17->Size = 2048MB
5:644 0:000 SmbiosTable.Type17->Bank/Device = BANK4 DIMM4
5:644 0:000 Type 17 Index = 5
5:644 0:000 SmbiosTable.Type17->Speed = 1066MHz
5:644 0:000 SmbiosTable.Type17->Size = 2048MB
5:644 0:000 SmbiosTable.Type17->Bank/Device = BANK5 DIMM5
5:644 0:000 Boot status=0
5:644 0:000 Clover revision: 3320 running on Studio XPS 435T_9000
5:644 0:000 ... with board 0X501H
5:644 0:000 CPU Vendor = 756E6547 Model=106A5
5:644 0:000 The CPU supported turbo
5:644 0:000 BrandString = Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
5:644 0:000 FSBFrequency=133MHz DMIvalue=133330kHz
5:644 0:000 Corrected FSBFrequency=133MHz
5:644 0:000 Found QCLK_RATIO at bus 0xFF dev=3 funs=4
5:644 0:000 qpi read from PCI 19
5:644 0:000 qpimult 25
5:644 0:000 qpibusspeed 6666500kHz
5:644 0:000 Vendor/Model/Stepping: 0x756E6547/0x1A/0x5
5:644 0:000 Family/ExtFamily: 0x6/0x0
5:644 0:000 MaxDiv/MinDiv: 20.0/12
5:644 0:000 Turbo: 21/21/21/22
5:644 0:000 Features: 0xBFEBFBFF
5:644 0:000 Threads: 8
5:644 0:000 Cores: 4
5:644 0:000 FSB: 133 MHz
5:644 0:000 CPU: 2666 MHz
5:644 0:000 TSC: 2666 MHz
5:644 0:000 PIS: 6666 MHz
5:644 0:000 PCI (00|00:00.00) : 8086 3405 class=060000
5:644 0:000 PCI (00|00:01.00) : 8086 3408 class=060400
5:644 0:000 PCI (00|00:03.00) : 8086 340A class=060400
5:644 0:000 PCI (00|08:00.00) : 10DE 0A20 class=030000
5:644 0:000 Found NVidia model=nVidia GeForce GT 220
5:644 0:000 PCI (00|08:00.01) : 10DE 0BE2 class=040300
5:644 0:000 PCI (00|00:07.00) : 8086 340E class=060400
5:644 0:000 PCI (00|00:09.00) : 8086 3410 class=060400
5:644 0:000 PCI (00|00:14.00) : 8086 342E class=080000
5:644 0:000 PCI (00|00:14.01) : 8086 3422 class=080000
5:644 0:000 PCI (00|00:14.02) : 8086 3423 class=080000
5:644 0:000 PCI (00|00:14.03) : 8086 3438 class=080000
5:645 0:000 PCI (00|00:1A.00) : 8086 3A37 class=0C0300
5:645 0:000 PCI (00|00:1A.01) : 8086 3A38 class=0C0300
5:645 0:000 PCI (00|00:1A.02) : 8086 3A39 class=0C0300
5:645 0:000 PCI (00|00:1A.07) : 8086 3A3C class=0C0320
5:645 0:000 PCI (00|00:1B.00) : 8086 3A3E class=040300
5:645 0:000 PCI (00|00:1C.00) : 8086 3A40 class=060400
5:645 0:000 PCI (00|00:1C.02) : 8086 3A44 class=060400
5:645 0:000 PCI (00|04:00.00) : 10EC 8168 class=020000
5:645 0:000 LAN 0, Vendor=10EC, MMIO=D800
5:645 0:000 PCI (00|00:1C.03) : 8086 3A46 class=060400
5:645 0:000 PCI (00|03:00.00) : 197B 2363 class=010185
5:645 0:000 PCI (00|00:1C.04) : 8086 3A48 class=060400
5:645 0:000 PCI (00|02:00.00) : 197B 2380 class=0C0010
5:645 0:000 PCI (00|00:1D.00) : 8086 3A34 class=0C0300
5:645 0:000 PCI (00|00:1D.01) : 8086 3A35 class=0C0300
5:645 0:000 PCI (00|00:1D.02) : 8086 3A36 class=0C0300
5:645 0:000 PCI (00|00:1D.07) : 8086 3A3A class=0C0320
5:645 0:000 PCI (00|00:1E.00) : 8086 244E class=060401
5:645 0:000 PCI (00|00:1F.00) : 8086 3A16 class=060100
5:645 0:000 PCI (00|00:1F.02) : 8086 3A22 class=010601
5:645 0:000 PCI (00|00:1F.03) : 8086 3A30 class=0C0500
5:645 0:000 PCI (00|FF:00.00) : 8086 2C41 class=060000
5:645 0:000 PCI (00|FF:00.01) : 8086 2C01 class=060000
5:645 0:000 PCI (00|FF:02.00) : 8086 2C10 class=060000
5:645 0:000 PCI (00|FF:02.01) : 8086 2C11 class=060000
5:645 0:000 PCI (00|FF:03.00) : 8086 2C18 class=060000
5:645 0:000 PCI (00|FF:03.01) : 8086 2C19 class=060000
5:645 0:000 PCI (00|FF:03.04) : 8086 2C1C class=060000
5:645 0:000 PCI (00|FF:04.00) : 8086 2C20 class=060000
5:645 0:000 PCI (00|FF:04.01) : 8086 2C21 class=060000
5:645 0:000 PCI (00|FF:04.02) : 8086 2C22 class=060000
5:645 0:000 PCI (00|FF:04.03) : 8086 2C23 class=060000
5:645 0:000 PCI (00|FF:05.00) : 8086 2C28 class=060000
5:645 0:000 PCI (00|FF:05.01) : 8086 2C29 class=060000
5:645 0:000 PCI (00|FF:05.02) : 8086 2C2A class=060000
5:645 0:000 PCI (00|FF:05.03) : 8086 2C2B class=060000
5:645 0:000 PCI (00|FF:06.00) : 8086 2C30 class=060000
5:645 0:000 PCI (00|FF:06.01) : 8086 2C31 class=060000
5:645 0:000 PCI (00|FF:06.02) : 8086 2C32 class=060000
5:645 0:000 PCI (00|FF:06.03) : 8086 2C33 class=060000
5:645 0:000 Clover load options size = 0 bytes
5:656 0:011 Using OEM config.plist at path: EFI\CLOVER\config.plist
5:657 0:000 EFI\CLOVER\config.plist loaded: Success
5:657 0:000 Found theme directory: embedded
5:657 0:000 Found theme directory: random
5:657 0:000 Found theme directory: tonymacx86
5:660 0:003 Loading early settings
5:660 0:000 timeout set to 3
5:660 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
5:660 0:000 KextsToPatch: 4 requested
5:660 0:000 KextsToPatch 0: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
5:660 0:000 KextsToPatch 1: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC888) Kext bin patch, data len: 4
5:660 0:000 KextsToPatch 2: AppleHDA (t1-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
5:660 0:000 KextsToPatch 3: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
5:660 0:000 Default theme: tonymacx86
5:660 0:000 Hiding entries with string Windows
5:660 0:000 Hiding entries with string \EFI\BOOT\BOOTX64.EFI
5:660 0:000 LoadDrivers() start
5:660 0:000 Loading FSInject-64.efi status=Success
5:661 0:000 LoadDrivers() end
5:661 0:000 SetScreenResolution: 1920x1080 - not found!
5:661 0:000 Console modes reported: 4, available modes:
5:661 0:000 Mode 1: 80x25
5:661 0:000 Mode 2: 80x50
5:661 0:000 Mode 3: 100x31
5:661 0:000 Mode 4: 160x53 (current mode)
5:661 0:000 SetScreenResolution: 1280x1024 - already set
5:661 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1CCA8BEE-2C6A-4983-B0E5-18EB9A4F6B58,0x28,0x64000)
5:662 0:001 ScanSPD() start
5:662 0:000 SMBus CmdReg: 0x3
5:662 0:000 Scanning SMBus [8086:3A30], mmio: 0xF93FFC04, ioport: 0x400, hostc: 0x1
5:662 0:000 Slots to scan [8]...
5:677 0:014 SPD[0]: Type 11 @0x50
5:686 0:008 DDR speed 1066MHz
5:686 0:000 Slot: 0 Type 24 2048MB 1066MHz Vendor=Elpida PartNo=EBJ21UE8BAFA-AE-E0 SerialNo=020B000404080E0A
5:700 0:014 SPD[1]: Type 11 @0x51
5:709 0:008 DDR speed 1066MHz
5:709 0:000 Slot: 1 Type 24 2048MB 1066MHz Vendor=Elpida PartNo=EBJ21UE8BAFA-AE-E0 SerialNo=020B000404080E0E
5:724 0:014 SPD[2]: Type 11 @0x52
5:733 0:008 DDR speed 1066MHz
5:733 0:000 Slot: 2 Type 24 2048MB 1066MHz Vendor=Elpida PartNo=EBJ21UE8BAFA-AE-E0 SerialNo=020B000404080F0B
5:747 0:014 SPD[3]: Type 11 @0x53
5:756 0:008 DDR speed 1066MHz
5:756 0:000 Slot: 3 Type 24 2048MB 1066MHz Vendor=Elpida PartNo=EBJ21UE8BAFA-AE-E0 SerialNo=020B000404080F0E
5:770 0:014 SPD[4]: Type 11 @0x54
5:779 0:009 DDR speed 1333MHz
5:779 0:000 Slot: 4 Type 24 2048MB 1333MHz Vendor=Micron Technology PartNo=16JTF25664AY-1G4D1D1 SerialNo=0D0805010C020C00
5:794 0:014 SPD[5]: Type 11 @0x55
5:803 0:008 DDR speed 1333MHz
5:803 0:000 Slot: 5 Type 24 2048MB 1333MHz Vendor=Micron Technology PartNo=16JTF25664AY-1G4D1D1 SerialNo=0D0805010C020B0E
5:815 0:012 ScanSPD() end
5:815 0:000 Get Acpi Tables List from RSDT:
5:815 0:000 Found table: FACP MI09 len=132
5:815 0:000 Found table: APIC MI09 len=140
5:815 0:000 Found table: MCFG MI09 len=60
5:815 0:000 Found table: SLIC MI09 len=374
5:815 0:000 Found table: OEMB MI09 len=113
5:815 0:000 Found table: HPET MI09 len=56
5:815 0:000 Found table: ASPT PerfTune len=52
5:815 0:000 Found table: WDTT OEMWDTT len=308
5:815 0:000 Found table: SSDT CpuPm len=4760
5:815 0:000 Calibrated TSC frequency =2659999915 =2659MHz
5:815 0:000 Loading main settings
5:815 0:000 Config set Fixes will override FixMask mask!
5:815 0:000 final mask=00008051
5:819 0:003 found 8 volumes with blockIO
5:819 0:000 0. Volume:
5:819 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
5:819 0:000 Result of bootcode detection: bootable unknown (legacy)
5:819 0:000 1. Volume:
5:819 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
5:820 0:000 2. Volume:
5:820 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
5:820 0:000 found optical drive
5:820 0:000 3. Volume:
5:820 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,1CCA8BEE-2C6A-4983-B0E5-18EB9A4F6B58,0x28,0x64000)
5:820 0:000 Result of bootcode detection: bootable Clover (clover)
5:820 0:000 This is SelfVolume !!
5:820 0:000 4. Volume:
5:820 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,DA870BC7-A055-461C-AB04-40084843679F,0x64028,0x573AC780)
5:820 0:000 Result of bootcode detection: bootable unknown (legacy)
5:820 0:000 5. Volume:
5:820 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,8B0B89B7-9BDC-40F4-B3BF-B5AA9B8E6698,0x574107A8,0x135F20)
5:820 0:000 6. Volume:
5:820 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,E66BBE27-1F57-4381-A88C-9D647B4AADEA,0x28,0x64000)
5:820 0:000 Result of bootcode detection: bootable unknown (legacy)
5:838 0:017 7. Volume:
5:838 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(2,GPT,BB168FA3-8627-4D89-8351-8B0CCD800433,0x64028,0x3A2E1FE0)
5:875 0:037 Loading nvram.plist from Vol 'OS_Mavericks' - loaded, size=1111
5:895 0:019 PutNvramPlistToRtVars ...
5:895 0:000 Adding Key: EFIBluetoothDelay: Size = 2, Data: B8 0B
5:895 0:000 Adding Key: LocationServicesEnabled: Size = 1, Data: 01
5:895 0:000 Adding Key: SystemAudioVolume: Size = 1, Data: 01
5:895 0:000 Adding Key: SystemAudioVolumeDB: Size = 1, Data: 00
5:895 0:000 Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 01 00 12 0A 00 00 00 00 10 3A 00 1A 7D DA 71 13
5:895 0:000 Adding Key: bootercfg: Size = 2, Data: 28 00
5:895 0:000 Adding Key: csr-active-config: Size = 4, Data: 03 00 00 00
5:895 0:000 Adding Key: fmm-computer-name: Size = 19, Data: 43 68 61 72 6C 65 73 E2 80 99 73 20 4D 61 63 20 50 72 6F
5:895 0:000 Adding Key: install-product-url: Size = 74, Data: 78 2D 6F 73 70 72 6F 64 75 63 74 3A 2F 2F 43 38 45 33 37 33 34 32 2D 46 32 44 31 2D 33 44 34 37 2D 42 42 30 43 2D 44 37 32 38 41 43 41 39 44 42 32 38 2F 4F 53 25 32 30 58 25 32 30 49 6E 73 74 61 6C 6C 25 32 30 44 61 74 61
5:895 0:000 Adding Key: prev-lang:kbd: Size = 4, Data: 65 6E 3A 30
5:895 0:000 Adding Key: rc_imgsrc_info: Size = 101, Data: 62 70 6C 69 73 74 30 30 A1 01 D1 02 03 5F 10 24 43 38 45 33 37 33 34 32 2D 46 32 44 31 2D 33 44 34 37 2D 42 42 30 43 2D 44 37 32 38 41 43 41 39 44 42 32 38 5C 4F 53 5F 4D 61 76 65 72 69 63 6B 73 08 0A 0D 34 00 00 00 00 00 00 01 01 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 41
5:895 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none'
5:895 0:000 Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)
5:895 0:000 Warning! Character width should be even!
5:895 0:000 Choosing theme tonymacx86
5:895 0:000 Custom legacy start
5:895 0:000 Custom legacy end
5:895 0:000 Scanning legacy ...
5:895 0:000 0: 'Whole Disc Boot' (legacy) not legacy
5:895 0:000 1: 'Whole Disc Boot' (legacy) not legacy
5:895 0:000 2: 'Whole Disc Boot' (legacy) not legacy
5:895 0:000 3: 'EFI' (clover) add legacy
5:926 0:031 added 'Boot Clover from EFI' OSType=3 Icon=clover
5:926 0:000 4: 'OS_Mavericks' (legacy) not legacy
5:926 0:000 5: 'Recovery HD' (legacy) not legacy
5:926 0:000 6: 'EFI' (legacy) not legacy
5:926 0:000 7: '500GB' (legacy) not legacy
5:926 0:000 Custom entries start
5:926 0:000 Custom entries finish
5:926 0:000 Scanning loaders...
5:926 0:000 0: 'Whole Disc Boot' no file system
5:926 0:000 1: 'Whole Disc Boot' no file system
5:926 0:000 2: 'Whole Disc Boot' no file system
5:926 0:000 3: 'EFI'
5:973 0:046 4: 'OS_Mavericks'
5:992 0:018 AddLoaderEntry for Volume Name=OS_Mavericks
6:013 0:021 Check if volume Is Hibernated:
6:013 0:000 Check sleep image 'by signature':
6:077 0:064 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
6:077 0:000 SleepImage name from pref: ImageVolume = 'OS_Mavericks', ImageName = '\private\var\vm\sleepimage'
6:107 0:029 sleepimage not found -> Not Found
6:107 0:000 hibernated: no - sign
6:215 0:108 5: 'Recovery HD'
6:215 0:000 AddLoaderEntry for Volume Name=Recovery HD
6:273 0:058 6: 'EFI'
6:306 0:032 7: '500GB'
6:339 0:033 Custom tool start
6:339 0:000 Custom tool end
6:340 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi
6:340 0:000 Checking EFI partition Volume 3 for Clover
6:340 0:000 Found Clover
6:341 0:001 Checking EFI partition Volume 6 for Clover
6:344 0:003 GetEfiBootDeviceFromNvram: efi-boot-device-data not found
6:344 0:000 EfiBootVolume not found
6:344 0:000 Default boot entry not found
6:344 0:000 DefaultIndex=-1 and MainMenu.EntryCount=9
6:928 0:583 Found Mouse device:
6:928 0:000 GUI ready
39:306 32:378 adding to menu SSDT (54445353) CpuPm (6D50757043) L=4760(0x1298)
39:306 0:000 adding to menu WDTT (54544457) OEMWDTT (20545444574D454F) L=308(0x134)
39:306 0:000 adding to menu ASPT (54505341) PerfTune (656E755466726550) L=52(0x34)
39:306 0:000 adding to menu HPET (54455048) MI09 (202020203930494D) L=56(0x38)
39:306 0:000 adding to menu OEMB (424D454F) MI09 (202020203930494D) L=113(0x71)
39:306 0:000 adding to menu SLIC (43494C53) MI09 (2020203930494D) L=374(0x176)
39:306 0:000 adding to menu MCFG (4746434D) MI09 (202020203930494D) L=60(0x3C)
39:306 0:000 adding to menu APIC (43495041) MI09 (202020203930494D) L=140(0x8C)
39:306 0:000 adding to menu FACP (50434146) MI09 (202020203930494D) L=132(0x84)
43:773 4:466 EDITED: [+]
55:716 11:943 BootOption of the entry is empty
55:716 0:000 StartLoader() start
55:716 0:000 Entry->Settings: <null string>
55:716 0:000 Finally: Bus=132999kHz CPU=2660MHz
55:716 0:000 Kernel and Kext Patches at BEC740F0:
55:716 0:000 Allowed: y
55:716 0:000 Debug: n
55:716 0:000 KernelCpu: n
55:716 0:000 Lapic: n
55:716 0:000 Haswell-E: n
55:716 0:000 AICPUPM: y
55:716 0:000 AppleRTC: y
55:716 0:000 KernelPm: y
55:716 0:000 FakeCPUID: 0x0
55:716 0:000 ATIController: null
55:716 0:000 ATIDataLength: 0
55:716 0:000 0 Kexts to load
55:716 0:000 4 Kexts to patch
55:716 0:000 KextPatch[0]: 4 bytes, AppleHDA
55:716 0:000 KextPatch[1]: 4 bytes, AppleHDA
55:716 0:000 KextPatch[2]: 6 bytes, AppleHDA
55:716 0:000 KextPatch[3]: 8 bytes, AppleAHCIPort
55:716 0:000 Loading boot.efi status=Success
55:992 0:276 GetOSVersion: : 10.11.1
55:992 0:000 insert table 9 for dev 0:0
55:992 0:000 insert table 9 for dev 0:1
55:992 0:000 insert table 9 for dev 0:0
55:992 0:000 insert table 9 for dev 0:0
55:993 0:000 Channels: 3
55:993 0:000 Interleave: 0 2 4 1 3 5 6 8 10 7 9 11 12 14 16 13 15 17 18 20 22 19 21 23
55:993 0:000 SMBIOS Type 17 Index = 0 => 0 0:
55:993 0:000 BANK0 DIMM0 1066MHz 2048MB
55:993 0:000 mTotalSystemMemory = 2048
55:993 0:000 SMBIOS Type 17 Index = 1 => 2 2:
55:993 0:000 BANK1 DIMM0 1066MHz 2048MB
55:993 0:000 mTotalSystemMemory = 4096
55:993 0:000 SMBIOS Type 17 Index = 2 => 4 4:
55:993 0:000 BANK2 DIMM0 1333MHz 2048MB
55:993 0:000 mTotalSystemMemory = 6144
55:993 0:000 SMBIOS Type 17 Index = 3 => 1 1:
55:993 0:000 BANK0 DIMM1 1066MHz 2048MB
55:993 0:000 mTotalSystemMemory = 8192
55:993 0:000 SMBIOS Type 17 Index = 4 => 3 3:
55:993 0:000 BANK1 DIMM1 1066MHz 2048MB
55:993 0:000 mTotalSystemMemory = 10240
55:993 0:000 SMBIOS Type 17 Index = 5 => 5 5:
55:993 0:000 BANK2 DIMM1 1333MHz 2048MB
55:993 0:000 mTotalSystemMemory = 12288
55:993 0:000 NumberOfMemoryDevices = 6
55:993 0:000 Type20[0]->End = 0x1FFFFF, Type17[0] = 0x800
55:993 0:000 Type20[1]->End = 0x3FFFFF, Type17[1] = 0x1800
55:993 0:000 Type20[2]->End = 0x5FFFFF, Type17[2] = 0x3000
55:993 0:000 Type20[3]->End = 0x7FFFFF, Type17[3] = 0x5000
55:993 0:000 Type20[4]->End = 0x9FFFFF, Type17[4] = 0x7800
55:993 0:000 Type20[5]->End = 0xBFFFFF, Type17[5] = 0xA800
55:993 0:000 RSDT 0xBF760000
55:993 0:000 FADT from RSDT: 0xBF760200
55:993 0:000 Xsdt is not found! Creating new one
55:993 0:000 RsdPointer is Acpi 1.0 - creating new one Acpi 2.0
55:993 0:000 RsdPointer Acpi 2.0 installed
55:993 0:000 RSDT entries = 9
55:993 0:000 Xsdt reallocation done
55:993 0:000 old FADT length=84
55:993 0:000 Found OperationRegion(BIOS, SystemMemory, BF76E064, ...)
55:993 0:000 Found OperationRegion(PCFG, SystemMemory, 0, ...)
55:993 0:000 Found OperationRegion(PCFG, SystemMemory, 0, ...)
55:993 0:000 Found OperationRegion(PCFG, SystemMemory, 0, ...)
55:993 0:000 Found OperationRegion(PCFG, SystemMemory, 0, ...)
55:993 0:000 Found OperationRegion(PCFG, SystemMemory, 0, ...)
55:993 0:000 Found OperationRegion(PCFG, SystemMemory, 0, ...)
55:993 0:000 Found OperationRegion(PCFG, SystemMemory, 0, ...)
56:012 0:018 DSDT found in booted volume
56:031 0:019 Apply DsdtFixMask=0x00008051 old way
56:031 0:000 drop _DSM mask=0x0000
56:031 0:000 ========= Auto patch DSDT Starting ========
56:031 0:000 VideoCard devID=0xA2010DE
56:031 0:000 DisplayADR1[0] = 0x30000, DisplayADR2[0] = 0x0
56:031 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
56:031 0:000 USBADR[1] = 0x1A0001 and PCIe = 0xFFFE
56:031 0:000 USBADR[2] = 0x1A0002 and PCIe = 0xFFFE
56:031 0:000 USBADR[3] = 0x1A0007 and PCIe = 0xFFFE
56:031 0:000 Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
56:032 0:000 USBADR[4] = 0x1D0000 and PCIe = 0xFFFE
56:032 0:000 USBADR[5] = 0x1D0001 and PCIe = 0xFFFE
56:032 0:000 USBADR[6] = 0x1D0002 and PCIe = 0xFFFE
56:032 0:000 USBADR[7] = 0x1D0007 and PCIe = 0xFFFE
56:032 0:000 first CPU found at 2B offset 2E
56:032 0:000 score candidate at 27
56:032 0:000 score inserted in acpi_cpu_score _PR_
56:032 0:000 Found ACPI CPU: P001 And P002 And P003 And P004 And P005 And P006 And P007 And P008
within the score: _PR_
56:032 0:000 Found PCIROOTUID = 0
56:032 0:000 Start RTC Fix
56:032 0:000 found RTC had IRQNoFlag will move -3 bytes
56:032 0:000 ...len=5F3F
56:032 0:000 new size written to 1390 shift=0 len=5F3F
56:032 0:000 len after correct outers 5F3F
56:032 0:000 Start TMR Fix
56:032 0:000 Start PIC Fix
56:032 0:000 PIC size=2B at 12EC
56:032 0:000 found PIC had IRQNoFlag will move -3 bytes
56:032 0:000 Fix Device PIC size -3
56:032 0:000 Start HPET Fix
56:032 0:000 patch HDEF in DSDT
56:033 0:000 Start HDA Fix
56:033 0:000 Start Add Device HDEF
56:033 0:000 ========= Auto patch DSDT Finished ========
56:033 0:000 Patch table: SSDT CpuPm
56:033 0:000 SSDT len = 0x1298
56:033 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
56:033 0:000 Xsdt has tables count=9
56:033 0:000 corrected XSDT length=108
56:033 0:000 CPUBase=1 and ApicCPUBase=1 ApicCPUNum=8
56:033 0:000 EdidDiscovered size=128
56:033 0:000 00 | 00 FF FF FF FF FF FF 00 5A 63 1C 0F 01 01 01 01
56:033 0:000 16 | 03 10 01 03 80 26 1E 78 2E 68 75 A2 5A 49 9F 23
56:033 0:000 32 | 13 50 54 BF EF 80 81 80 71 4F 61 59 45 59 31 59
56:033 0:000 48 | 31 0A 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70
56:033 0:000 64 | 13 00 78 2D 11 00 00 1E 00 00 00 FF 00 50 53 33
56:033 0:000 80 | 30 36 30 33 31 30 37 37 39 0A 00 00 00 FD 00 32
56:033 0:000 96 | 55 1E 52 0E 00 0A 20 20 20 20 20 20 00 00 00 FC
56:033 0:000 112 | 00 56 58 39 32 34 0A 20 20 20 20 20 20 20 00 0B
56:033 0:000 mem_detected 1073741824
56:033 0:000 read_nVidia_ROM
56:033 0:000 Using PRAMIN fixups
56:191 0:158 patch_nvidia_rom
56:192 0:000 version 70.16.13.00.01
56:192 0:000 nVidia nVidia GeForce GT 220 1024MB NVA5 [10DE:0A20] ::
56:192 0:000 PcieRoot(0x0)\Pci(0x3,0x0)\Pci(0x0,0x0)
56:192 0:000 devprop_add_nvidia_template
56:192 0:000 default NVCAP: 04000000-00000300-0C000000-00000007-00000000
56:192 0:000 HDA Controller [8086:3A3E] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
56:192 0:000 LAN Controller [10EC:8168] :: PcieRoot(0x0)\Pci(0x1C,0x2)\Pci(0x0,0x0)
56:192 0:000 stringlength = 2168
56:192 0:000 CurrentMode: Width=1280 Height=1024
56:192 0:000 Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BDE19C18
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BDE19C18
56:193 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
56:193 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
56:193 0:000 Extra kext: EFI\CLOVER\kexts\10.11\FakeSMC.kext
56:225 0:031 Extra kext: EFI\CLOVER\kexts\10.11\realtekALC.kext
56:232 0:007 Extra kext: EFI\CLOVER\kexts\10.11\RealtekRTL8111.kext
56:238 0:005 Removed efi-boot-device-data variable: Not Found
56:238 0:000 Custom boot is disabled
56:238 0:000 Closing log