Hello everyone,
I'm trying to mount a Kaby Lake / 200-series chipset build on macOS Sierra 10.12.5.
I built my USB drive using UniBeast 7.1.1 that was running on El Capitan but I used the macOS Sierra 10.12.5 app downloaded from the AppStore.
To not repeat myself I must say that my config is on my signature and profile.
After properly configured the BIOS, I boot from USB drive. In Clover options I spoofed my CPU ID to 0x0506E3 and start from USB. Then I got "prohibited signal". So I reboot and add "-v" option to Clover to look what happened faking CPU ID again and choosing again my USB drive. For my surprise it just boot correctly through all those messages and it shows the installation screen.
So I partitioned and erased my disk for the first time ever and proceed with the installation without problems. In the end of the installation it rebooted automatically. I fake the CPU ID again in Clover and now choose my new hard drive fresh installed. Then I got "prohibited signal" again. So I reboot and add "-v" option once.
I'm currently stuck at this point and the verbose give me two different messages that change from one to other in each reboot, but does not always alternate. First message ends the booting process and gives me the condition to reboot using Ctrl+Alt+Del. Other message freezes the PC completely and I need to hard reset using the button. These two message are attached to this post.
After these tries, I also already modified my config.plist inside the EFI partition of my USB drive with changes below to do not need to do on every reboot:
- CPU ID spoofed to 0x0506E3 under /KernelAndKextPatches/FakeCPUID.
- Intel Graphics ID spoofed to 0x19168086 under /Devices/FakeID/IntelGFX.
- Added "-v" to /Boot/Arguments.
- Added the 'Skylake Glitch Fix' (AAPL,GfxYTile) to /Devices/AddProperties.
- Changed CSR to 0x67 (before, during install, was 0x3) under /RtVariables/CsrActiveConfig.
Along reading these 26 pages I read somethings that I need more help to find or even understand:
- I should try with OsxAptioFixDrv-64.efi instead of OsxAptioFix2Drv-64.efi, but where can I find the first one from secure source?
- It is not good to use VBoxHfs-64.efi, but where I should find another from secure source? This driver was created by UniBeast!
- It is not good to share configurations because serial number are included and maybe each person needs to have yours own serial. Where can I generate one for me?
- My SMBIOS just contain a ProductName iMac14,2 with Trust=false. Should I change this?
I also attached my EFI folder of my USB Drive and my final words is that I'm trying to install with everything mounted.
I'll try right now to install without GPU while waiting for your help guys.
I post here if I get any progress or different screens.
Thank you!