[NEW / TESTING] Intel 7th Generation Kaby Lake CPUs + 200 Series Motherboards in macOS

[Max1194]

I did the update, removed the FakeCPUID, updated NVIDIA drivers and the Mac crashes after a few minutes.
Did anyone have the same issue?
I faked the CPUID again and the crash keeps happening...

I really don't know what to do...

 

[xlla]

I did the update, removed the FakeCPUID, updated NVIDIA drivers and the Mac crashes after a few minutes.
Did anyone have the same issue?
I faked the CPUID again and the crash keeps happening...

I really don't know what to do...

I did updated too, and encounter random reboot when I start up computer.

 

[TeamJones]

Still in a pickle...can't boot properly. I'm about one reboot away from playing target practice with this thing. Here are a few pictures of what I keep seeing...

Normal start up, it just sticks at the beginning of the progress bar.

Verbose mode gives me this.....

And with Handoff enabled, I get a boot loop.

I'm still trying to learn a lot so any help is greatly appreciated.

 

[Stork]

Did you see the updated OP?

BTW, this thread was never intended to be a help thread. Please post your problem in Sierra Desktop Support forum section if nothing in the OP can help you.

 

[TeamJones]

Did you see the updated OP?

BTW, this thread was never intended to be a help thread. Please post your problem in Sierra Desktop Support forum section if nothing in the OP can help you.

Oh ok...thanks!

 

[techgeeksid]

Did you see the updated OP?

BTW, this thread was never intended to be a help thread. Please post your problem in Sierra Desktop Support forum section if nothing in the OP can help you.

i had similar problem how did you fix it?

 

[osaj]

Yes, if you are using a Kaby Lake (7000 series) processor. However, Sierra 10.12.6 now supports Kaby Lake processors so Post #1 has been over come by events. (FakeCPUID is no longer required.)

It means that you do not need Intel Graphics ID

 

[techgeeksid]

It means that you do not need Intel Graphics ID

what should i do after installing macos from unibeast ?

i use similar hardware z170x and 7700k

intel graphics is showing 7mb in macos 10.2.6 how to fix this?

 

[P1LGRIM]

intel graphics is showing 7mb in macos 10.2.6 how to fix this?

BIOS - Disable Integrated graphics - Set PEG as Primary
Use a digital connection - DVI or HDMI - VGA is not supported.
Boot with nv_disable=1
May need to update Clover
Install web drivers
Config.plist - Do not inject Intel or Nvidia graphics and no ig-platform-id
Config.plist - Disable SIP fully - CsrActiveConfig 0x67
Edit config.plist - NvidiaWeb = true as per Link
May need to emulate native NVRAM - Problem 6
Remove nv_disable=1 from config.plist
May need to install Lilu.kext and NvidiaGraphicsFixup.kext to /Library/Extensions

Potential Problems :
HDMI 2.0 is not supported.
If your graphics card has more than one output of the type that you are using then try another one.
Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition

 

[techgeeksid]

BIOS - Disable Integrated graphics - Set PEG as Primary
Use a digital connection - DVI or HDMI - VGA is not supported.
Boot with nv_disable=1
May need to update Clover
Install web drivers
Config.plist - Do not inject Intel or Nvidia graphics and no ig-platform-id
Config.plist - Disable SIP fully - CsrActiveConfig 0x67
Edit config.plist - NvidiaWeb = true as per Link
May need to emulate native NVRAM - Problem 6
Remove nv_disable=1 from config.plist
May need to install Lilu.kext and NvidiaGraphicsFixup.kext to /Library/Extensions

Potential Problems :
HDMI 2.0 is not supported.
If your graphics card has more than one output of the type that you are using then try another one.
Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition

can i use imac 18.3?
Boot with nv_disable=1 (how to do this??)