- Joined
- Oct 2, 2013
- Messages
- 59
- Motherboard
- Z87X-UD5H
- CPU
- i7-4770K LGA 1150
- Graphics
- EVGA Geforce GTX 670 FTW
- Mac
- Classic Mac
- Mobile Phone
Morning WildWillow...
While in BIOs I did see a graphics display that had 3 icons. Displayed was the SSD, HDD and the optical drive in boot sequence. I made certain that the SSD which contains the OS was the primary boot device followed by the HDD. I'll check when I reset the BIOs and pull the video card to see if there is another area where the first boot priority is shown.
If I go back and reset the BIOs will I have to reinstall Multibeast or can I just go directly to BIOs and make the changes like setting the first display to PCIe 1, disable the onboard intel graphics and check to see if the boot priority is set to P0 and not P1?
Just want to make sure I'm doing it right. Thanks for the assist.
Sukebei
While in BIOs I did see a graphics display that had 3 icons. Displayed was the SSD, HDD and the optical drive in boot sequence. I made certain that the SSD which contains the OS was the primary boot device followed by the HDD. I'll check when I reset the BIOs and pull the video card to see if there is another area where the first boot priority is shown.
If I go back and reset the BIOs will I have to reinstall Multibeast or can I just go directly to BIOs and make the changes like setting the first display to PCIe 1, disable the onboard intel graphics and check to see if the boot priority is set to P0 and not P1?
Just want to make sure I'm doing it right. Thanks for the assist.
Sukebei