- Joined
- Dec 25, 2019
- Messages
- 20
- Motherboard
- Gigabyte Z390 AORUS PRO WIFI
- CPU
- i7-9700K
- Graphics
- GTX 1660 + UHD 630
- Mac
- Mobile Phone
Hello again.
So I've finally gotten sound and internet (via ethernet) working perfectly on my setup, so I'm very excited about that. I've also gotten Windows installed without issue. My final obstacle is to get my integrated graphics running properly. I've tried many different combinations and settings to try to get them to work but it always shows up as 7MB which is obviously causing some graphical issues, most notably during boot where the screen glitches out, and when opening Launchpad where it is insanely choppy and slow. I've seen other threads and tried several methods to rectify this problem but nothing has worked, so I'm hoping someone else can help me find a solution to get me to a fully (or almost fully) working Hackintosh. I have to connect my monitor to my graphics card instead of my motherboard otherwise the screen goes blank at boot.
Attached is my CLOVER folder with my kexts, drivers and config.plist. Is there something I'm missing?
UPDATE:
I successfully updated to 10.14.6 and fixed several problems I was having with 10.13.6. However, the graphical issue remains the same and I cannot fix it, no matter what I do. I've been at this for days and it's the last problem I'm having with the OS, and yet I cannot find a solution despite trying so many different fixes.
Again, I have to iterate that I have to plug the HDMI cable into my GPU in order to avoid a black screen at boot. That might be part of the issue but I'm not able to load into OS X by switching the BIOS to load IGPX and plugging the cable into the motherboard. It results in a black screen every time.
SUCCESS:
The answer was right in front of me. The patch that's built into Hackintool for the Gigabyte z390 AORUS Master works perfectly for the z390 AORUS Pro Wifi. I am now running at full functionality!
So I've finally gotten sound and internet (via ethernet) working perfectly on my setup, so I'm very excited about that. I've also gotten Windows installed without issue. My final obstacle is to get my integrated graphics running properly. I've tried many different combinations and settings to try to get them to work but it always shows up as 7MB which is obviously causing some graphical issues, most notably during boot where the screen glitches out, and when opening Launchpad where it is insanely choppy and slow. I've seen other threads and tried several methods to rectify this problem but nothing has worked, so I'm hoping someone else can help me find a solution to get me to a fully (or almost fully) working Hackintosh. I have to connect my monitor to my graphics card instead of my motherboard otherwise the screen goes blank at boot.
Attached is my CLOVER folder with my kexts, drivers and config.plist. Is there something I'm missing?
UPDATE:
I successfully updated to 10.14.6 and fixed several problems I was having with 10.13.6. However, the graphical issue remains the same and I cannot fix it, no matter what I do. I've been at this for days and it's the last problem I'm having with the OS, and yet I cannot find a solution despite trying so many different fixes.
Again, I have to iterate that I have to plug the HDMI cable into my GPU in order to avoid a black screen at boot. That might be part of the issue but I'm not able to load into OS X by switching the BIOS to load IGPX and plugging the cable into the motherboard. It results in a black screen every time.
SUCCESS:
The answer was right in front of me. The patch that's built into Hackintool for the Gigabyte z390 AORUS Master works perfectly for the z390 AORUS Pro Wifi. I am now running at full functionality!
Attachments
Last edited: