- Joined
- Jul 24, 2012
- Messages
- 16
- Motherboard
- GA-H77-DS3H
- CPU
- i5-3570K
- Graphics
- Gigabyte HD 6450 1GB
- Mac
- Classic Mac
- Mobile Phone
GA-H77-DS3H BIOS rev. F5, 16GB DDR3 1600, i5-3570K, ATI HD 6450 (not using HD4000)
I can boot perfectly fine by keeping my UniBeast USB drive attached. My PC will boot to that and I can boot into my ML installation.
If I try to boot my ML installation by itself, it will hang at "macx_swapon SUCCESS", show some info about the bluetooth adapter I have attached (IOGEAR GBU321 with Magic Trackpad), and not go anywhere. At first, since ethernet worked without needing to run MultiBeast, I didn't run it. After installing AtherosL1c driver from MultiBeast, it would hang at the same place, but it would report a MAC address for my ethernet controller.
Both times I can see the orange light on my ethernet jack blinking. Booting in safe mode or with the HD4000 seems to make no difference.
I am wondering if it is a video issue, because when I boot from the UniBeast USB the last thing it reports before going into OS X is something about starting the window manager.
I have tried Chimera 1.9 and 1.10, can't seem to get past this point though.
I can boot perfectly fine by keeping my UniBeast USB drive attached. My PC will boot to that and I can boot into my ML installation.
If I try to boot my ML installation by itself, it will hang at "macx_swapon SUCCESS", show some info about the bluetooth adapter I have attached (IOGEAR GBU321 with Magic Trackpad), and not go anywhere. At first, since ethernet worked without needing to run MultiBeast, I didn't run it. After installing AtherosL1c driver from MultiBeast, it would hang at the same place, but it would report a MAC address for my ethernet controller.
Both times I can see the orange light on my ethernet jack blinking. Booting in safe mode or with the HD4000 seems to make no difference.
I am wondering if it is a video issue, because when I boot from the UniBeast USB the last thing it reports before going into OS X is something about starting the window manager.
I have tried Chimera 1.9 and 1.10, can't seem to get past this point though.