I'm trying to find a good graphics card for my computer to primarily run Adobe Premiere Pro. My current graphics card is extremely slow in export and rendering times. Here are the specs for my computer:
iMac (21.5-inch, Late 2013)
Processor 3.1 GHz Intel Core i5
Memory 16 GB 1600 MHz DDR3...
Hello there, my pc have these specs:
Intel Core i5 3470 1155
Radeon RX 460
I was looking to install Yosemite, and i've experienced problems with graphics acceleration, since AMD RX series isn't supported by Yosemite, so, i managed to update to Sierra, to solve the graphics...
i have a problem installing 10.11. on my hackintosh.
i have a fully working system based on 10.9. with a gigabyte H77-DS3H mainboard.
Just want to install a 10.11. system on a separate new hard drive and have the option to do a dual boot with the existent 10.9. system.
I am planning to build a hackintosh. I want to know if gigabyte h77 ds3h motherboard would work with it. Its just like the Gigabyte ga z77 ds3h motherboard which works perfectly but the h77-ds3h has an intel h77 chipset instead of z77 on z77-ds3h. Help!
H77 vs B75 AND HD-7770 vs GTX-650
I am planning to build a hackintosh with the following specifications:
Corsair VS450 PSU
Gigabyte H77M-D3H/Gigabyte B75M-D3H
Intel Pentium G2020
Sapphire ATI Radeon HD7770 1GB [GDDR5]/Zotac nVidia GTX650 1GB [GDDR5]
I am currently in the process of picking parts for a new build.
To help keep costs to a minimum I'm trying to get my best bang for buck.
But I wanted to know if there are any differences between the GA-H77-DS3H & the GA-Z77-DS3H.
I was looking on the Gigabyte site and they...
So i was looking at building a new hackintosh, i selected some parts from tonymacx ivy bridge systems.
The whole point of this thread is for people to get a rough idea of how to get the new gigabyte boards up and running.
This is my hardware.
I've just bought a zotac h77 (atheros combo wifi+bluetooth) and i3 3225 (hd4000).
I've spent several hours reading the miramar and minihack reference threads, but I've not jet figured out which is the correct sequence to install mountain lion on this motherboard.
I know that the...
I have decided to build my first hackintosh. I have selected the following components, please advice and suggest if any change is needed.
1)MOTHERBOARD: GigaByte GA-H77-DS3H
2)PROCESSOR: Intel 3rd Gen Core i5 3570K 3.4Ghz
3)RAM: CORSAIR VENGANCE 2x8GB (16GB)
4)HDD: Seagate Barracuda 2 TB...
Hi all, this issue has been bugging me for a while now but haven't got time to tackle it. I did a fresh unibeast installation, installed Multibeast 5.1 and then updated to 10.8.2 via system software update and I was stuck in the looping wheel at splash screen. Booted in verbose mode and this is...
I've digged through a couple of threads to figure out which Z77/H77 boards can do what and so far I've got this:
+ = yes, X = no, - somewhat
ASUS P8[Z|H]77-I DELUXE
I just bought my parts and I'm gonna be building my hackintosh next week. I want my machine to run Final cut Pro X, Photoshop CS 6 and lightroom smoothly.
This is my list:
-Motherboard: Gigabyte H77N-WiFi ITX (I also ordered a half size atheros ar9280 for the WiFi...
If everything went smoothly, you'll be back up on your desktop in no time. Unfortunately, many people (including myself) experienced a few issues when upgrading to 10.8.2. Here are the most common problems and how to fix them:
Kernel panic during boot - If this happens, you're...
I tried everything , Iboot till unibeast from Lion 10.6 till ML 10.8.2
From a CD till USb stick. From -x till PCiroot uid = 0 or 1 no differents
Iboot doesn't work at all during installion it freeze till the Lan card
Unibeast installed after rebooting , the ML , still the...
built my first hackintosh without too much effort, , i7 2600k and H77 ds3h Mobo, I didnt use any graphics kexts as it seemed to work oob on my 19inch monitor, problem is to watch movies in windoze I would usually use the 2nd DVI port to HDMI to my 42 LG...
First time hackintosh builder here. Loving the fun of doing this, but i've hit a road block and it's getting a bit frustrating!
I have a:
-Ga-H77-DS3H (bios v F5)
-EVGA GTX 550 TI 1GB
-TP-Link Wireless Adapter
-HDMI connection from Video card to monitor
I installed Mountain...
ML on Ivy Bridge + Zotac H77 *wait for MultiBeast 5?*
Just started my hackintosh installation and learning process and hit my very first speed bump (or dead end?). These are the hardware I'm using:
Motherboard: Zotac H77-ITX-A-E
CPU: Ivy Bridge i5 3550
GPU: MSI R6670 GDDR5
Thanks to everyone who has helped to develop the utils and tools on this and other sites as well as the reams of documentation and information available here and elsewhere!
I am trying to build a Hack Mini, but am having issues with the install which may stem from Unibeast.
GA-H77-DS3H BIOS rev. F5, 16GB DDR3 1600, i5-3570K, ATI HD 6450 (not using HD4000)
I can boot perfectly fine by keeping my UniBeast USB drive attached. My PC will boot to that and I can boot into my ML installation.
If I try to boot my ML installation by itself, it will hang at "macx_swapon...
NO MULTIBEAST NECESSARY (maybe)!
I ran into a few strange errors trying to install this the first couple times, but when it worked it worked flawlessly. Hopefully this can help people who are running into issues with their graphics card or HD4000 graphics during installation. Removing your...