I have recently installed Mojave on my first Hackintosh successfully. Everything works fine but there are some annoying graphics glitches in certain applications. See for example the ghosting in Safari tabs in the picture below:
Sometimes these glitches are so disruptive that do not let...
I thought I would share with you all my experience because it didn't work at first and I searched for this setup and could not find anything that helped. ASUS p8z77-v Deluxe with i7-3770.
Ok. Went through everything on...
This is my first Hackintosh build on a Laptop, Here are my spec :
Laptop Model : ASUS K46CM - 2.7 - Clover UEFI
CPU/Processor : Intel Core i7 3517U (Ivy Bridge)
Graphics 1 : Intel HD Graphics 4000
Graphics 2 : NVIDIA GeForce GT635M 2GB DDR3
Memory : 8 GB DDR3 Dual...
Confirmed working Mojave 10.14.1 on HP EliteBook 8470p
I originally purchased this with an i5-3320M @ 2.6GHz and a 1280x768 resolution screen as a Hackintosh project. I upgraded the CPU to a Quad Core i7-3740QM @ 2.7GHz and put 16GB Ram in it. I got High Sierra to originally work, but then I...
I am using Lenovo x230 model laptop
Configuration : I5-3320M, Hd4000 graphics
I am using unlocked MSR bits mod bios
Presently I am not using Any CPUpower management ssdt patches , in clover I select PluginType enable
I am using normally , I reed a article about Ivybridge Power...
Problem with my CPU which never change P-States (optimization of the voltage and CPU frequency during operation) and so stay stucked at 1,6Hhz (middle of the capacity of my cpu)
I'm trying to have CPU/GPU Native Power Management on 10.11 to 10.14 (Mojave) with a ivy bridge cpu...
I had success in installing os Mojave, everything works!!!
System Version: macOS 10.14 (18A391)
core i5 ( ivy bridge)
RX 580 8gb Gpu
12 gb ram
my usb installer could not boot in Hdmi mode, so I used DP for installation and then booted with Hdmi.
I've noticed when I use the ssdt generated by ssdtPRGen for power management, my graphics doesn't work properly (I think it's QE/CI). Although sometimes graphics work fine with it but randomly and rare. If I drop that ssdt graphics work correctly.
I tried beta and -c 3 switch but nothing...
This post is not intended to be an end-to-end guide to demonstrate hackintosh installation and setup. There are already many great posts for that. I want to focus on some small, but critical features after your machine is up and running. Specially on this popular, but old architecture. It's more...
I've been trying for a few days to install High Sierra on my PC, with poor results.
I've CLOVER r4411, using lastest UNIBEAST to create USB.
Can anyone suggest me which values to insert in the SMBIOS and / or which config.plist to use with the configuration that you can see in the...
Has anybody updated to HP UEFI firmware 3.06 on a HP 6300 or 8300 with an existing Mac OS install? My 8300 CMT has 2.99. I'm running High Sierra 10.13.4 (without the latest supplemental update) and using the Nvidia web driver for my GTX 1050 Ti. Everything else is set up per the Sierra/High...
The only specifically required components for this build are an ASRock Rack EP2C602 motherboard and Ivy Bridge-EP processors. Your case, ram, PSU, etc should have no bearing on your success. As noted below, the LGA 2011 socket supports both Sandy Bridge-EP (E5 v1) and Ivy Bridge-EP...
As the title states I am trying to create a 10.13.3 bootable flash drive.
What I am using...
8 GB USB 2.0 Flashdrive Formated to GUID.
2015 MacBook Air
Latest version of UniBeast and 10.13.3 downloaded from the app store.
Kinda lost on this one. Im sure its something...
I can upgrade install from Install High Sierra.app and the USB installer, but I can't get to the second part of the installation. I can't boot the SSD. OS starts to load, but gets tuck on kextd stall ACPIP_SMC error or something.
I have tried everything and now I'm about to buy a new SSD and...
I had installed El Capitan before on this setup last year, i only had problems with audio and network but i solved both and it worked fine but i had switched off to windows and now i'm wondering if i could install High Sierra on this setup, and if i could, should i install El...
I'm facing some problems after 10.12.6 update:
Laptop never wakes from sleep, instead it reboots.
Power Management never goes below 3Ghz in "Intel Power Gadget"
What I tried:
- Almost any flag in Clover's ACPI section
- Patching DSDT / SSDTs in Maciasl and via Clover Hotpatch
I'm considering making the switch to a hackintosh, since I acquired an old Macbook Pro and I'm in love with MacOS.
My main concern is that I'll have to go buy a completely new Mobo, CPU and RAM.
My current build is:
Motherboard: ASUS P8Z77 -I Deluxe
CPU: Intel I7-3770K
Worked late on my Hackintosh build I've been using for a year now. I peacefully shut it down, and went to sleep. The next morning as I woke up, my Hackintosh didn't want to boot up so I booted in verbose mode (my bootloader is Chimera) to see what's going on.
The system did a fsck at the...
First off, I'm new to Hackintosh so sorry if I don't know much.
My current hardware:
RAM: Gskill DDR3 @ 1600Mhz
HDD: Seagate 1TB 7200RPM (ps: this motherboard has only Sata 2 ports)
another HDD (250GB) where my old Windows documents are.