- Joined
- Aug 31, 2014
- Messages
- 10
- Motherboard
- MB GA-Z97X-UD7-TH
- CPU
- i7-4790k
- Graphics
- GTX 1070 Ti
- Mac
- Mobile Phone
I followed the tutorial to get HDMI audio on my GTX 770 card, but still no audio. Now in system preferences, the sound field, my monitor appears as audio output, but without sound and the message: "The selected device has no output controls."
What I did:
Step 1:
1 - AppleHDA.kext left the Multibeast (ALC1150 + 9 Series Motherboards Support Intel)
2 - AppleIntelFramebufferAzul.kext chose graphics_intel_hd5k-blue-d-90_patch a comment, do not know which option to choose, do not understand what this patch does and what the difference between the commands, b, c, d, e, f and g. Could you help me choose the right one?
Series 9 / Step 2: OS X HDMI Audio Guides- select one
1 dsdt edits: [Guide] OS X hdmi_audio-dsdt_v2.pdf.zip
1 URL: https://raw.github.com/toleda/audio_hdmi_9series/ master
2 Patches / 8series (subject to change)
AMI-1-Clean_Compile 9Series I click apply and then compile ?? And without restarting or save choose an option below?
2.-AMI-HD4600 AMD-Nvidia-A1
AMI-3-HD4600 AMD-Nvidia-A2 Again do not know what is the difference between A1 and A2, which I choose for my build? And click on apply and then compile? Except as DSDT.aml in / Extra / folder ...?
Restarted, but continued without audio.
When compiled some warnings appeared (Unknown reserved name (_HRV), Unknown reserved name (_WDG), Not all control paths return a value (0E1X), Not all control paths return a value (_INI), Not all control paths return a value (TWAK), Not all control paths return a value (TPTS), Not all control paths return a value (0E1X), but no error.
Could anyone help me?
My setup is:
1. OSX 10.9.4 / GA-Z97X-UD7-TH / BIOS F4 / i7-4790K / GeForce GTX 770 WindForce GV-N770WF3-2GD 2GB GDDR5.
2. Unibeast 4.0.2 + Multibeast 6.4.2 (i choose Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Audio > Realtek ALCxxx > Intel 9 Series Motherboard Support)3. Attached.
4
4.1 Attached
4.2 Attached
4.3 Attached
4.4 Attached
Thanks you so much!!
Best regards,
TroddenTrack
What I did:
Step 1:
1 - AppleHDA.kext left the Multibeast (ALC1150 + 9 Series Motherboards Support Intel)
2 - AppleIntelFramebufferAzul.kext chose graphics_intel_hd5k-blue-d-90_patch a comment, do not know which option to choose, do not understand what this patch does and what the difference between the commands, b, c, d, e, f and g. Could you help me choose the right one?
Series 9 / Step 2: OS X HDMI Audio Guides- select one
1 dsdt edits: [Guide] OS X hdmi_audio-dsdt_v2.pdf.zip
1 URL: https://raw.github.com/toleda/audio_hdmi_9series/ master
2 Patches / 8series (subject to change)
AMI-1-Clean_Compile 9Series I click apply and then compile ?? And without restarting or save choose an option below?
2.-AMI-HD4600 AMD-Nvidia-A1
AMI-3-HD4600 AMD-Nvidia-A2 Again do not know what is the difference between A1 and A2, which I choose for my build? And click on apply and then compile? Except as DSDT.aml in / Extra / folder ...?
Restarted, but continued without audio.
When compiled some warnings appeared (Unknown reserved name (_HRV), Unknown reserved name (_WDG), Not all control paths return a value (0E1X), Not all control paths return a value (_INI), Not all control paths return a value (TWAK), Not all control paths return a value (TPTS), Not all control paths return a value (0E1X), but no error.
Could anyone help me?
My setup is:
1. OSX 10.9.4 / GA-Z97X-UD7-TH / BIOS F4 / i7-4790K / GeForce GTX 770 WindForce GV-N770WF3-2GD 2GB GDDR5.
2. Unibeast 4.0.2 + Multibeast 6.4.2 (i choose Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Audio > Realtek ALCxxx > Intel 9 Series Motherboard Support)3. Attached.
4
4.1 Attached
4.2 Attached
4.3 Attached
4.4 Attached
Thanks you so much!!
Best regards,
TroddenTrack