Sniki
Moderator
- Joined
- Jan 5, 2016
- Messages
- 2,313
- Motherboard
- HP Elite 8300 SFF
- CPU
- i7-3770
- Graphics
- Intel HD 3000 | GTX 1650 LP
- Mac
- Mobile Phone
Of course since previously we had to use the Skylake Spoof until 10.12.6.I'm pretty sure I've seen KabyLake-R work ok with Skylake spoof...
I'm not convinced WhateverGreen patching works in the spoof scenarios.
Would require analyzing/debugging WhateverGreen/logs/etc.
But I'm sure it has to do something with the switch to WhateverGreen.kext.
Good thing is i discovered something, like I said when I connect the HDMI cable, HDMI Audio works, Everything is perfect on TV but the internal display is sort of stuttering (40hz or below) refresh rate like, cursor laggy etc and if i disconnect the cable the screen stays black. (have to force reboot/shutdown laptop by holding down the power button for long).
What I discovered is that if I close the laptop lid while HDMI cable plugged into TV, the image disappears and appears again on the TV, then when I open the lid after, the lag on internal display is gone, no screen flickering, no laggy cursor, I remove the HDMI cable, internal screen just blinks once and image comes back.
What could it be ?
Also, probably best to make sure the graphics kexts are in cache (use invalid ig-platform-id, not invalid device-id, so you can get them in cache). And it may be wise to create an appropriate LiluFriend.kext for the Lilu-based kexts you're using.
Will give a try to that, but since that discovery I wonder if we can come up with a solution.
I did create a LiluFriend.kext and added on it's info.plist all the Lilu based kexts there according to the description.
Not sure if it is just mental but I do have a feeling that I'm noticing a slightly faster boot time.