- Joined
- Feb 10, 2017
- Messages
- 3
Hi gents, I've been having a particular problem that maybe someone here might know what to do. Over the past couple of weeks I have been trying to create a image of a dual drive/dual boot machine with Windows 10/OSX Sierra installed. Originally I had both on a single 1 TB hard drive, however the practicality of that seemed to be not useful at all. Which is when I moved to two separate drives. The initial machine is able to boot into either OS without a problem using the Clover Bootloader. But now comes the interesting part, I need to be able to image the machine so I can clone them to a duplicate machine with the same hardware specs. Any time I try and clone or image the OSX side, the result just shows the Boot Loader itself at start up. Windows would also not be seen as well. No other boot options are listed. I ran through the Shell to see if it would list them (separate partitions), which it did. Is there a simple fix to try and re-add the boot options back in?
I've tried Acronis, SuperDupper, Apple's own Disk Utility, and have just started trying Clonezila, any thoughts
Specs:
Windows 10 Pro / Mac OSX Sierra
intel i5-4690K
CM Hyper 212 EVO coolers
16GB (8x2) 1600 Corsair Vengeance
MSI 797 PCMate
GTX 970 4GB ZOTAC
WD Blue 1TB 7200 HDD x2
I've tried Acronis, SuperDupper, Apple's own Disk Utility, and have just started trying Clonezila, any thoughts
Specs:
Windows 10 Pro / Mac OSX Sierra
intel i5-4690K
CM Hyper 212 EVO coolers
16GB (8x2) 1600 Corsair Vengeance
MSI 797 PCMate
GTX 970 4GB ZOTAC
WD Blue 1TB 7200 HDD x2
Last edited: