Contribute
Register

HP Probook Installer Clover Edition

zegaroid said:
Hi, I had fully working Yosemite on my 4430s Probook but after i upgrade the latest HP ProBook Installer Clover Version 6.2.17.5, it wont proceed to the desktop i only got black screen.

However when i test HDMI output it works. only my built-in display has black screen.

How to solve this issue?

Thank you in advance.
Click to expand...

Read the RED text in the guide.
 
nguyenmac said:
ONlpRon.png

​

HP Probook Installer Clover Edition 6.2.16 (May 1st)

Download

Changelog

Source @bitbucket

Guide to install Mavericks on HP Probook

Guide to install Yosemite on HP Probook

Troubleshooting

If you have any problems with PBI, please send me your troubleshooting files:
Run PBI CE, select Extra Tools > Troubleshooting, then compress the Troubleshooting folder on Desktop and post here.
Click to expand...

I just want to inform that using last PBI CE, I found a problem selecting setup options. I don't remember exactly which, but selecting for example create ssdt, it de-select other choices I've done before and I have to re-select them.

Thanks!
 
i purchased the AzureWave Broadcom BCM94352HMB/BCM94352 802.11/ac/867Mbps WLAN + BT4.0 Half Mini PCI-E Card.

i tried switching the antenna connections and i have the same results.

What BT firmware are you talking about?
 
otag said:
i purchased the AzureWave Broadcom BCM94352HMB/BCM94352 802.11/ac/867Mbps WLAN + BT4.0 Half Mini PCI-E Card.

i tried switching the antenna connections and i have the same results.

What BT firmware are you talking about?
Click to expand...

Who are you replying to?
 
otag said:
i purchased the AzureWave Broadcom BCM94352HMB/BCM94352 802.11/ac/867Mbps WLAN + BT4.0 Half Mini PCI-E Card.

i tried switching the antenna connections and i have the same results.

What BT firmware are you talking about?
Click to expand...

Follow these instructions exactly. Remove any existing bluetooth firmware uploader you have (BTFirmwareUploader.kext, old version of BrcmPatchRAM.kext).

Remove ProBookARPT.kext.

Install latest FakePCIID.kext and FakePCIID_BCM94352Z_as_BCM94360CS2.kext: https://github.com/RehabMan/OS-X-Fake-PCI-ID

Remove any config.plist patch you have for AirPort Extreme branding.

Install latest BrcmPatchRAM.kext: https://github.com/RehabMan/OS-X-BrcmPatchRAM

Final config for BT/WiFi:
- BrcmPatchRAM: firmware uploader
- handoff patch in config.plistRep
- FakePCIID kexts: AirPort Extreme branding for WiFi
- 5ghz patch in config.plist

Make especially sure you remove remove ProBookARPT.kext. check EFI/Clover/kexts folder.

Got these instructions from RehabMan. It works.
:thumbup:
 
ocean223 said:
Follow these instructions exactly. Remove any existing bluetooth firmware uploader you have (BTFirmwareUploader.kext, old version of BrcmPatchRAM.kext).

Remove ProBookARPT.kext.

Install latest FakePCIID.kext and FakePCIID_BCM94352Z_as_BCM94360CS2.kext: https://github.com/RehabMan/OS-X-Fake-PCI-ID

Remove any config.plist patch you have for AirPort Extreme branding.

Install latest BrcmPatchRAM.kext: https://github.com/RehabMan/OS-X-BrcmPatchRAM

Final config for BT/WiFi:
- BrcmPatchRAM: firmware uploader
- handoff patch in config.plistRep
- FakePCIID kexts: AirPort Extreme branding for WiFi
- 5ghz patch in config.plist

Make especially sure you remove remove ProBookARPT.kext. check EFI/Clover/kexts folder.

Got these instructions from RehabMan. It works.
:thumbup:
Click to expand...

Now you also have to check /S/L/E for ProBookARPT.kext (and existing firmware uploaders). Latest version of PBI-CE installs to both /S/L/E and Clover/kexts.
 
RehabMan said:
Now you also have to check /S/L/E for ProBookARPT.kext (and existing firmware uploaders). Latest version of PBI-CE installs to both /S/L/E and Clover/kexts.
Click to expand...

Oh yeah, forgot about that.:clap:
 

Attachments

  • 4430s.ioreg
    3.2 MB · Views: 119
Main System
GA-Z77-HD3 |  i5 3570K |  HD 4000
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top