- Joined
- Aug 14, 2012
- Messages
- 41
- Motherboard
- GA-Z87MX-D3H
- CPU
- i7-4770
- Graphics
- GTX 980 Ti
- Mac
- Mobile Phone
Hi,
As many here, I decided to get a cheap AMD graphics card (I got a Gigabyte Radeon RX 580 8G Gaming) to replace my GTX 980Ti so I can upgrade to Mojave. Before ordering the card I did lots of reading here concluding the Radeon should work OOB.
My setup:
I'm able to use share screen from another mac, but the system runs super slow. Then I found out here that setting the BIOS to use the integrated graphics as default should do the trick, but that only made two of my displays work. I connected one of the displays to both the Radeon and the MoBo HDMI so I can see the bios splash screen, but I can't see Clover and be able to pick between Windows or Mac.
At this point, I decided to create a Mojave clover boot USB to install it from scratch, but even this boots to a black screen.
I swear I did lots of reading here and for the life of me, I can't make this card work on my setup.
Please help!
As many here, I decided to get a cheap AMD graphics card (I got a Gigabyte Radeon RX 580 8G Gaming) to replace my GTX 980Ti so I can upgrade to Mojave. Before ordering the card I did lots of reading here concluding the Radeon should work OOB.
My setup:
- Gigabyte GA-Z87MX-D3H MoBo
- Intel Core i7 4770 CPU
- Mac OS High Sierra 10.13 on a 1TB SSD
- Windows 10 on a separated 500GB SSD
- Clover bootloader, with dual boot
- 3 x Dell 27" displays, connected via display port (2) and HDMI (1)
- Ran the uninstaller for the Nvidia web driver
- Manually removed CUDA
- Turned PC off, replaced the cards, turned PC on
I'm able to use share screen from another mac, but the system runs super slow. Then I found out here that setting the BIOS to use the integrated graphics as default should do the trick, but that only made two of my displays work. I connected one of the displays to both the Radeon and the MoBo HDMI so I can see the bios splash screen, but I can't see Clover and be able to pick between Windows or Mac.
At this point, I decided to create a Mojave clover boot USB to install it from scratch, but even this boots to a black screen.
I swear I did lots of reading here and for the life of me, I can't make this card work on my setup.
Please help!