- Joined
- Mar 19, 2018
- Messages
- 12
- Motherboard
- Gigabyte Auros Gaming 5
- CPU
- i7-8700
- Graphics
- GTX 1060
- Mac
- Mobile Phone
Verbose:No verbose boot photo attached.
Read FAQ, "Problem Reporting" again. Carefully.
Thanks.
Verbose:No verbose boot photo attached.
Read FAQ, "Problem Reporting" again. Carefully.
Verbose:
Thanks.
Added AptioMemoryFix.efi Still having the same issue.You should be using AptioMemoryFix.efi.
Added AptioMemoryFix.efi Still having the same issue.
-v:
AptioMemoryFix, OsxAptioFix*, and OsxLowMemFix are mutually exclusive. Use only one.
Also, you didn't use the RehabMan Clover build as recommended in the guide.
Make sure you use a USB2 stick (as is written in the guide).
Try all USB ports.
Check BIOS settings against those recommended in the guide.
And you seemed to have forgot SATA-100-series-unsupported.kext.
Also,
From where did you download macOS?
On what hardware did you create your USB installer?
I'm using clover from: https://sourceforge.net/projects/cloverefiboot/
Wrong.I'm using USB 3.0 stick
I realize that, but it is not the recommended build in my guide (the guide you claim to be following).
Wrong.
The guide recommends using a USB2 stick.
USB3 often not working until after following this guide (a post install task):
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/
Ok! I've restarted the guide, found 32gb usb stick 2.0
I did everything as intended on the guide, and I'm getting KP in the same place
I'm really appreciating your help! I don't know if bios config's are being the problem, but before trying to mod it or flash it I want to be sure if nothing else can be done. Thanks!
-v
I realize that, but it is not the recommended build in my guide (the guide you claim to be following).
Wrong.
The guide recommends using a USB2 stick.
USB3 often not working until after following this guide (a post install task):
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/
Your image does not show a KP.
As per guide, you must try all USB ports, and you must try OsxAptioFixDrv-64.efi (or other memory fixes).
Also, you should try both with and without USBInjectAll.kext.
It adds up to quite a few combinations.
Note that EmuVariableUefi-64.efi is not to be used with AptioMemoryFix.efi.