BoomR
Moderator
- Joined
- Dec 18, 2011
- Messages
- 1,256
- Motherboard
- Gigabyte Z490 VISION D
- CPU
- i9-10850K
- Graphics
- RX 580
- Mac
- Classic Mac
- Mobile Phone
Ok...... I succeeded in booting on my fresh Mavericks using the bootloader of the Unibeast's USB Stick,
then I ran Multibeast for 10.9, choose:
View attachment 114367
Install, then I've got this:
View attachment 114368
and "FakeSMC.kext is not signed.....blabla"
I change my system language from French to English, ran again Multibeast, and choose to install only VoodooTSCSync and FakeSMC
VoodooTSCSync's still not recognize, but no more "FakeSMC.kext is not signed.....blabla" thing...
So it seems that FakeSMC is well installed, but what should I do for VoodooTSCSync, booting on the Unibeast's USB Stick, and use:
cp -R /Volumes/USB/Extra/Extensions/VoodooTSCSync.kext /Volumes/Mavericks/System/Library/Extensions/
???
My rig
GA-X99-UD4 rev.1 bios F9c
5960X @ Stock
32Go RAM
GTX285
500Go StataII 3,5" (mechanical)
Try GraphicsEnabler=No and use MacPro6,1 definition. Since you are using dedicated GPU, GE=no is the correct setting. GE=Yes is for motherboards with on-board HD4000/HD46000 graphics. That could be causing some problems.
Don't worry about the messages during MB install that alert you to kexts not being "signed" - this is normal.