Hackintosh stuck on loading bar

[jhbjhbjhb]

Hey guys, I really need help here. I've been trying for days and I haven't got anywhere. When I go to install hackimtosh high Sierra the progress bar below the Apple logo shows and starts loading but then it suddenly freezes at a certain position. Then a loading icon shows below the progress bar and it stays that way for good, even after waiting one hour. Btw I turn on USB injection and all the binary patches.

Specs
NVIDIA GeForce
Intel core i5 7th generation
And it's a Lenovo laptop

Also I should point out I'm not very good at understanding this kind of stuff so take it easy on me. I appreciate it

 

[RehabMan]

Hey guys, I really need help here. I've been trying for days and I haven't got anywhere. When I go to install hackimtosh high Sierra the progress bar below the Apple logo shows and starts loading but then it suddenly freezes at a certain position. Then a loading icon shows below the progress bar and it stays that way for good, even after waiting one hour. Btw I turn on USB injection and all the binary patches.

Specs
NVIDIA GeForce
Intel core i5 7th generation
And it's a Lenovo laptop

Also I should point out I'm not very good at understanding this kind of stuff so take it easy on me. I appreciate it

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[jhbjhbjhb]

I am having trouble finding my specifications in the signature build but here are all my specs in detail

Operating System
Windows 10 Home 64-bit
CPU
Intel Processor @ 2.50GHz
RAM
8.00GB
Motherboard
LENOVO Torronto 5C1 (U3E1)
Graphics
Generic PnP Monitor (1920x1080@60Hz)
Intel HD Graphics 620 (Lenovo)
4095MB NVIDIA GeForce 940MX (Lenovo)
Storage
931GB Western Digital WDC WD10JPCX-24UE4T0 (SATA) 24 °C
Optical Drives
HL-DT-ST DVDRAM GUE0N
Audio
Conexant SmartAudio HD

 

[jhbjhbjhb]

Thanks for the reply. I have done all you said but I'm still getting the same problem.

 

[RehabMan]

Thanks for the reply. I have done all you said but I'm still getting the same problem.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[jhbjhbjhb]

Ok, I've got everything done, here are the problem reporting files

 

[Feartech]

Ok, I've got everything done, here are the problem reporting files

you will need to follow this:
https://www.tonymacx86.com/threads/...-only-ran-for-0-seconds-with-dual-gpu.233092/

 

[RehabMan]

Ok, I've got everything done, here are the problem reporting files

Your config.plist is not from my guide.
This is the guide linked by post #2:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Follow it carefully.

 

[jhbjhbjhb]

neither worked, I have attched the aml pathch and the plist I used to make sure I did the right thing. Thanks. I also attached alll the original aml files to make it easier to check if I did everything right

 

[RehabMan]

neither worked, I have attched the aml pathch and the plist I used to make sure I did the right thing. Thanks. I also attached alll the original aml files to make it easier to check if I did everything right

"Problem Reporting" files are incomplete/wrong.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/